Rationalization with Handling Technology /

Κώδικας QR

Rationalization with Handling Technology /

Αποθηκεύτηκε σε:

Λεπτομέρειες βιβλιογραφικής εγγραφής
Κύριος συγγραφέας:	Stefan Hesse
Μορφή:	Βιβλίο
Γλώσσα:	Vietnamese
Έκδοση:	Denkendorf : Festo Didactic , 1999
Θέματα:	Kỹ thuật > Cơ khí
Ετικέτες:	Προσθήκη ετικέτας Δεν υπάρχουν, Καταχωρήστε ετικέτα πρώτοι!

Thư viện lưu trữ:	Thư viện Trường CĐ Kỹ Thuật Cao Thắng

Παρόμοια τεκμήρια

FESTO . Sensors for handling and processing technology. Proximity Sensors .Workbook /
ανά: Frank Ebel
Έκδοση: (2004)

FESTO . Sensors for handling and processing technology. Proximity Sensors .Textbook /
ανά: Frank Ebel
Έκδοση: (2004)

A Study of A Vibration Isolation System Using Negative Stiffness Structure For Passenger Seat : Doctor of Philosophy - Major: Mechanical Technology
ανά: Lê, Thanh Danh
Έκδοση: (2012)

Technology of Machine Tools.(Kỹ thuật chế tạo dụng cụ máy.) /
ανά: F Krar Steve
Έκδοση: (1997)

Giáo trình vật liệu và công nghệ cơ khí
ανά: Hoàng Tùng
Έκδοση: (2002)

Kỹ thuật rèn /
ανά: Đỗ Văn Đua
Έκδοση: (1990)

Vẽ kỹ thuật cơ khí T.1 /
ανά: Đặng Văn Cứ
Έκδοση: (2006)

Vẽ kỹ thuật cơ khí. T.2 /
ανά: Đặng Văn Cứ
Έκδοση: (1992)

Cours de Dessin Technique et De construction Mecanique /
ανά: M. Norbert
Έκδοση: (1969)

Air preparation /
ανά: Stefan Hesse
Έκδοση: (1995)

Spannen mit Druckluft und Vakuum /
ανά: Stefan Hesse
Έκδοση: (1999)

Modulare Einlegeeinrichtungen /
ανά: Stefan Hesse
Έκδοση: (2000)

FESTO . Sensors for handling and processing technology. Sensors for distancement /
ανά: H Dahlhoff
Έκδοση: (2004)

JTEC panel report on material handling technologies in Japan
Έκδοση: (1993)

Kỹ thuật học tổng hợp cơ khí - điện thiết bị và điện tử.
ανά: Nguyễn Văn Tuệ.
Έκδοση: (2007)

Cơ sở kỹ thuật cơ khí /
ανά: Đỗ Xuân Đinh
Έκδοση: (2005)

Giáo trình kỹ thuật cơ khí /
ανά: Hoàng Minh Công
Έκδοση: (2010)

Hỏi đáp về kỹ thuật cơ khí /
ανά: Nguyễn Chiến Thắng
Έκδοση: (1987)

Me'canique /
ανά: S Strelkov
Έκδοση: (1978)

Technologie des Fabrications Mecanique /
ανά: M Delalanette
Έκδοση: (1972)

Kỹ thuật cơ khí /
ανά: Xécgây Piđatốp
Έκδοση: (1975)

Manuel de Technologie Des Machines /
ανά: P. Beaauvais
Έκδοση: (1948)

Hệ thống thuỷ lực
Έκδοση: (2001)

Theoretical prediction and optimization for crashworthiness of multi-cell tubes under impact loading : Ph.D Thesis
ανά: Trần, Trọng Nhân
Έκδοση: (2015)

Nghiên cứu tính toán khả năng đáp ứng và xây dựng kết cấu bộ trợ lực cơ khí – thủy lực cho hệ thống thoát hiểm CCD (cabin-cáp-đu trượt) : Luận văn Thạc sĩ - Chuyên ngành: Kỹ thuật Cơ khí
ανά: Hồ, Hữu Thái
Έκδοση: (2020)

Nghiên cứu thông số làm việc của máy cắt gạch block AAC để đạt nhấp nhô bề mặt thấp nhất. : Luận văn Thạc sĩ - Chuyên ngành: Kỹ thuật Cơ khí
ανά: Trần, Minh Hoàng
Έκδοση: (2022)

Xây dựng các module tính toán động lực học để tối ưu thiết kế các cơ cấu phẳng và ứng dụng cho máy in lụa kiểu mới : Luận văn Thạc sĩ - Chuyên ngành: Kỹ thuật Cơ khí
ανά: Võ, Thành Kiệt
Έκδοση: (2022)

Nghiên cứu, thiết kế và điểu khiển chuỗi pin quang điện bám theo quỹ đạo mặt trời trong điều kiện thời tiết thay đổi sử dụng kỹ thuật mẫu ảo : Luận văn Thạc sĩ - Chuyên ngành: Kỹ thuật Cơ khí
ανά: Huỳnh, Bảo Kỳ
Έκδοση: (2022)

Phát triển phanh chất lưu biến từ có Roto hình chữ I : Luận văn Thạc sĩ - Chuyên ngành: Kỹ thuật Cơ khí
ανά: Văn, Đình Khanh
Έκδοση: (2022)

Thiết kế, chế tạo và thực nghiệm đánh giá phanh lưu chất từ biến (MRF) dạng đĩa với từ trường zigzag : Luận văn Thạc sĩ - Chuyên ngành: Kỹ thuật Cơ khí
ανά: Đỗ, Quí Duyên
Έκδοση: (2022)

Mechanical engineers’ handbook : Instrumentation , systems, control, and MEMS
Έκδοση: (2006)

Mechanical engineers’ handbook : Manufacturing and management
Έκδοση: (2006)

Giáo trình cơ sở kỹ thuật cơ khí
Έκδοση: (2013)

Nghiên cứu các thông số ảnh hưởng đến lực hái trái cà phê của máy thu hoạch cà phê : Luận văn thạc sĩ - Chuyên ngành: Kỹ thuật cơ khí
ανά: Nguyễn, Võ Tiến
Έκδοση: (2017)

Nghiên cứu các thông số độ bền của vách thùng xe đông lạnh làm bằng vật liệu composite polyester - sợi thủy tinh cấu trúc sandwich ở công ty Paccific Isotherms : Luận văn thạc sĩ - Chuyên ngành: Kỹ thuật cơ khí
ανά: Châu, Cao Nguyên Khang
Έκδοση: (2018)

Xây dựng mô hình bù trễ cho hệ thống cảm ứng lực hai bậc tự do sử dụng lưu chất từ biến : Luận văn thạc sĩ - Chuyên ngành: Kỹ thuật cơ khí
ανά: Trương, Ngọc Toàn
Έκδοση: (2018)

Microscale tribological response of the artificial and natural femoral heads in human hip joints : Doctoral of Philosophy - Major: Mechanical Engineering
ανά: Đường, Công Truyền
Έκδοση: (2012)

Numerical and experimental study of elastic deformation machining method for aspheric surface : Doctor of Engineering - Machanical Manufacturing & Automation
ανά: Nguyễn, Đức Nam
Έκδοση: (2012)

Piezoactuator - Based Active Mount for Vibration control : Doctor of Philosophy - Major: Mechanical Engineering
ανά: Nguyễn, Viễn Quốc
Έκδοση: (2010)

Design and Control of Cost - Effective Electrostatic Suspension Systems : Doctor Thesis - Major: Mechanical and Automotive Engineering
ανά: Lê, Thể Truyền
Έκδοση: (2011)