LIQUIDITES IN THE FIRMS BEFORE AND AFTER EQUITIZATION

QR-koodi

LIQUIDITES IN THE FIRMS BEFORE AND AFTER EQUITIZATION

Tallennettuna:

Bibliografiset tiedot
Päätekijä:	Nguyễn, Thị Xuân Hồng
Aineistotyyppi:	Artikkeli
Kieli:	Vietnamese
Julkaistu:	2023
Aiheet:	Tạp chí Khoa học & Công nghệ - Đại học Công nghiệp Hà Nội
Linkit:	https://sti.vista.gov.vn/tw/Pages/tai-lieu-khcn.aspx?ItemID=296553 https://scholar.dlu.edu.vn/thuvienso/handle/DLU123456789/127935
Tagit:	Lisää tagi Ei tageja, Lisää ensimmäinen tagi!

Thư viện lưu trữ:	Thư viện Trường Đại học Đà Lạt

Samankaltaisia teoksia

Studying the fatigue strength of C45 steel material before and after quenching
Tekijä: Trương, Chí Công, et al.
Julkaistu: (2024)

THE IMPACT OF INTERNATIONAL TRADE ON ECONOMIC GROWTH - AN INVESTIGATION INTO THE PERIODS BEFORE AND AFTER VIETNAM’S ACCESSION TO THE WTO
Tekijä: Nguyễn, Thị Mỹ Linh
Julkaistu: (2023)

FACTORS AFFECTING EARNINGS MANAGEMENT: CASE STUDY OF LISTED FIRMS IN VIETNAM
Tekijä: Hoàng, Thị Việt Hà, et al.
Julkaistu: (2024)

DIFFICULTIES IN IMPLEMENTING STATISTICS PROCESS CONTROL METHODS: EXPERIENCE FROM FOREIGN FIRMS
Tekijä: Phạm, Việt Dũng, et al.
Julkaistu: (2023)

RESEARCH A SUITABLE BRA STYLE FOR VIETNAMESE FEMALE AFTER THEIR MASTECTOMY
Tekijä: Trần, Thị Minh Kiều, et al.
Julkaistu: (2024)

DIFFICULTIES IN IMPLEMENTING STATISTICS PROCESS CONTROL METHODS: EXPERIENCE F-ROM FOREIGN FIRMS
Tekijä: Phạm, Việt Dũng, et al.
Julkaistu: (2024)

REGRESSION MODELS FOR DETERMINING FOREIGN OWNERSHIP RATIO IN VIETNAMESE LISTED FIRMS: THE ROLE OF ENVIRONMENTAL, SOCIAL, AND GOVERNANCE (ESG) SCORES
Tekijä: Vu, Hoang Minh, et al.
Julkaistu: (2025)

Influences of annealing temperature on the mechanical properties of the welded joints in a aluminum alloy + aluminum + steel layered composite after explosive welding
Tekijä: Nguyễn, Ngọc Hưng, et al.
Julkaistu: (2024)

DISEASE PATTERN OF PATIENTS ATTENDING TWO DISTRICT HOSPITALS FOR EXAMINATION AND TREATMENT DURING THE YEARS BEFORE AND AFTER THE COVID-19 PANDEMIC
Tekijä: Trương, Việt Dũng, et al.
Julkaistu: (2025)

Before and after the death
Tekijä: Doka, Kenneth J

STUDY PERFORMANCE AND EMISSION OF AN EFI MOTORCYCLE SUPPLEMENTED WITH HYDROGEN-RICH GAS DIRIVED FROM ON-BOARD Cu-Ni/Al2O3 CATALYST AFTER RUNNING 5.000KM
Tekijä: Trần, Văn Hoàng, et al.
Julkaistu: (2024)

STUDY PERFORMANCE AND EMISSION OF AN EFI MOTORCYCLE SUPPLEMENTED WITH HYDROGEN-RICH GAS DIRIVED F-ROM ON-BOARD Cu-Ni/Al2O3 CATALYST AFTER RUNNING 5.000KM
Tekijä: Trần, Văn Hoàng, et al.
Julkaistu: (2024)

STUDY ON THE INFLUENCE OF CUTTING PARAMETERS ON CONSUMPTION ENERGY AND SURFACE ROUGHNESS IN HIGH-SPEED FACE MILLING OF SKD11 STEEL AFTER HEAT TREATMENT USING ARTIFICIAL ECO-SYSTEM ALGORITHM
Tekijä: Dao, Van Duong, et al.
Julkaistu: (2025)

Photoshop CS2 before & after makeovers
Tekijä: Tally, Taz
Julkaistu: (2006)

Photoshop CS2 before & after makeovers
Tekijä: Tally, Taz
Julkaistu: (2006)

CHARACTER BUILDING METHOD FROM PROTOTYPE IN WRITER NAM CAO'S SHORT STORIES BEFORE THE AUGUST REVOLUTION
Tekijä: Dang, Thuy An, et al.
Julkaistu: (2023)

Race and Arab Americans before and after 9/11 :
Julkaistu: (2008)

The United States and the Taliban before and after 9/11
Tekijä: Cristol, Jonathan
Julkaistu: (2019)

C-HARACTER BUILDING METHOD F-ROM PROTOTYPE IN WRITER NAM CAO'S SHORT STORIES BEFORE THE AUGUST REVOLUTION
Tekijä: Dang, Thuy An, et al.
Julkaistu: (2024)

COLONIAL MASCULINITY IN GOING AFTER CACCIATO BY TIM O'BRIEN
Tekijä: Bui, Linh Hue, et al.
Julkaistu: (2025)

DIVERSIFICATION’S EFFECT ON FIRM VALUE – EVIDENCE F-ROM FOOD AND TOBACCO FIRMS
Tekijä: Lê, Trương Niệm
Julkaistu: (2024)

HIỆU QUẢ SỬ DỤNG TÀI SẢN CỦA CÁC DOANH NGHIỆP DỆT MAY NIÊM YẾT TRONG ĐẠI DỊCH COVID-19
Tekijä: Nguyễn, Thị Xuân Hồng
Julkaistu: (2025)

Experimental investigations of the energy absorption capacity of coconut mesocarp core sandwich panels
Tekijä: Nguyễn, Xuân Trường
Julkaistu: (2024)

APPLICATION OF MATLAB IN DETERMINING CONTACT POINTS ON STRAIGHT BEVEL GEARS
Tekijä: Nguyễn, Hồng Lĩnh
Julkaistu: (2023)

Research affect photos of the corner of the destination weld to the war size of MAG in the linked link
Tekijä: Nguyễn, Hồng Sơn
Julkaistu: (2024)

Predicting residual stresses and distortions in welding 316L stainless steel pipes using Sysweld software
Tekijä: Nguyễn, Hồng Thanh, et al.
Julkaistu: (2024)

CHEMICAL CONSTITUENTS AND BIOLOGY ACTIVITIES OF N-HEXANE EXTRACT FROM SANCHEZIA SPECIOSA LEAVES
Tekijä: Lê, Thị Hồng Nhung
Julkaistu: (2024)

CHEMICAL CONSTITUENTS AND BIOLOGY ACTIVITIES OF N-HEXANE EXTRACT F-ROM SANCHEZIA SPECIOSA LEAVES
Tekijä: Lê, Thị Hồng Nhung
Julkaistu: (2024)

RESEARCH ON THE EXTRACTION OF ALUMINA FROM KAOLIN IN PHU THO BY HYDROCHLORIC ACID
Tekijä: Phạn, Thị Quyên, et al.
Julkaistu: (2024)

RESEARCH ON THE EXTRACTION OF ALUMINA F-ROM KAOLIN IN PHU THO BY HYDROCHLORIC ACID
Tekijä: Phạn, Thị Quyên, et al.
Julkaistu: (2024)

Influence of joint clearance and linkage dimension deviation on the working position accuracy of output linkage in five-bar mechanism
Tekijä: Nguyễn, Văn Tuân, et al.
Julkaistu: (2024)

STUDY ON ONE-POT SYNTHESIS OF FELODIPINE USING ALUMINA SULFURIC ACID AS CATALYST
Tekijä: Vũ, Minh Tân, et al.
Julkaistu: (2023)

FACTORS AFFECTING BUSINESS PERFORMANCE OF ENTERPRISES: A STUDY BASED ON VIETNAM LISTED CONSTRUCTION ENTERPRISES’S DATA
Tekijä: Đặng, Thị Hương, et al.
Julkaistu: (2024)

FACTORS AFFECTING ABILITY OF DOING SCIENTIFIC RESEARCHES OF LECTURERS AT HANOI UNIVERSITY OF INDUSTRY
Tekijä: Nguyễn, Thị Hồng Nga, et al.
Julkaistu: (2024)

VIETNAM'S POPULATION AGING AND THE NECESSITY FOR THE DEVELOPMENT OF A NEW POPULATION POLICY IN THE YEARS AFTER 2020
Tekijä: Nguyen, Kim Hong
Julkaistu: (2025)

Modelling and simulation of a 4-stroke diesel engine
Tekijä: Đinh, Xuân Thành
Julkaistu: (2024)

EFFECT OF COMBINATION OF EGR, DOC, AND DPF TECHNOLOGIES FOR REDUCING EXHAUST EMISSION OF A DIESEL ENGINES
Tekijä: Đinh, Xuân Thành
Julkaistu: (2024)

Optimize the performance of cooling channel of injection mold made by 3D se-lective laser sintering technology
Tekijä: Đặng, Xuân Phương
Julkaistu: (2024)

A study of designing the stair-climbing mechanism for electric-powered wheelchair used by the disabled
Tekijä: Lê, Hồng Kỳ
Julkaistu: (2024)

IMPROVING THEPERFORMANCE OF MULTI-HOP ALL-OPTICAL PACKET - SWITCHING USING A MODIFIED PULSE POSITION MODULATION HEADER PROCESSING METHOD
Tekijä: Cao, Hồng Sơn
Julkaistu: (2024)