EFFECTS OF SOME WORKING PARAMETERS ON DRILLING PROCESS OF THE ROTARY PERCUSSIVE DRILLING

Codi QR

EFFECTS OF SOME WORKING PARAMETERS ON DRILLING PROCESS OF THE ROTARY PERCUSSIVE DRILLING

Guardat en:

Dades bibliogràfiques
Autors principals:	Lưu, Minh Hùng, Lê, Trọng Cường, Bùi, Văn Hải
Format:	Article
Idioma:	Vietnamese
Publicat:	2024
Matèries:	Tạp chí Khoa học & Công nghệ - Đại học Công nghiệp Hà Nội
Accés en línia:	https://scholar.dlu.edu.vn/thuvienso/handle/DLU123456789/210902
Etiquetes:	Afegir etiqueta Sense etiquetes, Sigues el primer a etiquetar aquest registre!

Thư viện lưu trữ:	Thư viện Trường Đại học Đà Lạt

Ítems similars

EFFECTS OF SOME WORKING PARAMETERS ON DRILLING PROCESS OF THE ROTARY PERCUSSIVE DRILLING
per: Lưu, Minh Hùng, et al.
Publicat: (2024)

A Study on the Dynamics of Blast Drilling Feeds Rotary and Pursue Driller’s holder manufactured in Vietnam
per: Bùi, Văn Trầm, et al.
Publicat: (2024)

Investigating the vibration of the deep hole drilling system using gun drilling method
per: Dương, Quốc Dũng, et al.
Publicat: (2024)

The two-minute drill :
per: Longenecker, Clinton O.
Publicat: (2007)

Data Analytics for Drilling Engineering
per: Xue, Qilong
Publicat: (2020)

DETERMINATION OF CABIN’S BASIC PARAMETERS FOR ROTARY CAR PARKING SYSTEM
per: Nguyễn, Thiết Lập, et al.
Publicat: (2023)

Drilling for gold : how corporations can successfully market to small businesses /
per: Warrillow, John, 1971-
Publicat: (2002)

Study on influence of technological parameters of percussion on the performance of dust extraction in experimental model of electrostatic precipitator
per: Nguyễn, Tiến Sỹ, et al.
Publicat: (2024)

Intensive course in Japanese: Dialogues and drills (Elementary)
per: Japanese Language Promotion Center
Publicat: (1979)

Intensive course in Japanese: Dialogues and drills (Elementary)
per: Japanese Language Promotion Center
Publicat: (1979)

THE IMPACT OF SOME PARAMETERS TO LONGAN DRYER PROCESS BY BIOGAS ENERGY
per: Samlanexay, Keoheuangpaseut, et al.
Publicat: (2024)

Study guide and additional drill problems for organic chemistry
per: Fessenden, Ralph J
Publicat: (1994)

The Will to Drill - Mining in Arctic Communites. 1st ed. 2018
per: Dale, Brigt, et al.
Publicat: (2020)

DETERMINATION OF RELATIONSHIP BETWEEN THE YARN TENSION AND SOME TECHNOLOGYCAL PARAMETERS IN THE WINDING PROCESS
per: Giần, Thị Thu Hường, et al.
Publicat: (2023)

DETERMINATION OF RELATIONSHIP BETWEEN THE YARN TENSION AND SOME TECHNOLOGYCAL PARAMETERS IN THE WINDING PROCESS
per: Giần, Thị Thu Hường, et al.
Publicat: (2024)

Một trăm hai mươi mốt 121 timed writings with skillbuilding drills
per: Clayton, Dean

Optimization parameters of the SLM process
per: Phan, Thanh Minh, et al.
Publicat: (2024)

Evaluating the effectiveness of Topsis-Taguchi integration for the multi-characteristics optimization of technological parameters in PMEDM process
per: Nguyễn, Hữu Phấn, et al.
Publicat: (2024)

RESEARCH AND DESIGN OF WSNs FOR MEASURING SOME PARAMETERS IN THE ENVIRONMENT OF BUILDING BASEMENTS
per: Quách, Đức Cường, et al.
Publicat: (2023)

RESEARCH AND DESIGN OF WSNs FOR MEASURING SOME PARAMETERS IN THE ENVIRONMENT OF BUILDING BASEMENTS
per: Quách, Đức Cường, et al.
Publicat: (2024)

Evaluating the effectiveness of Topsis-Taguchi integration for the multi-c-haracteristics optimization of technological parameters in PMEDM process
per: Nguyễn, Hữu Phấn, et al.
Publicat: (2024)

Research on the effects of some structural parameters on high productivity cassava chopping machine (10 -20 ton/h) using the experimental planning model
per: Nguyễn, Đình Tùng, et al.
Publicat: (2024)

The method of studying the effect of some technology parameters on surface quality, wheel wear and machining capacity during the surface grinding of Ti-6Al-4V alloy with CBN grinding wheel
per: Phí, Trọng Hùng, et al.
Publicat: (2024)

Experiment to determine effects of dynamic parameters to propeller shaft strength
per: Trần, Hữu Danh, et al.
Publicat: (2024)

DEVELOPMENT OF A SPEED CONTROL SYSTEM FOR ROTARY LOAD DRIVEN BY ELECTRIC MOTORS VIA MAGNETO-RHEOLOGICAL CLUTCH
per: Nguyễn, Quốc Hưng, et al.
Publicat: (2023)

DEVELOPMENT OF A SPEED CONTROL SYSTEM FOR ROTARY LOAD DRIVEN BY ELECTRIC MOTORS VIA MAGNETO-RHEOLOGICAL CLUTCH
per: Nguyễn, Quốc Hưng, et al.
Publicat: (2024)

EFFECT OF MARKER PLAN PARAMETERS ON FABRIC CONSUMPTION OF T-SHIRT IN GARMENT INDUSTRY
per: Nguyễn, Thị Lệ
Publicat: (2023)

Research on effect of technological parameters on the thinning of the sheet metal in hydrostatic forming
per: Nguyễn, Thị Thu, et al.
Publicat: (2024)

Design and manufacture of 3D circular rotary profile measuring equipment using laser scanning method
per: Lê, Xuân Cam, et al.
Publicat: (2024)

Experimental research on the influence of drying channel’s structural parameters on cassava morsel drying process
per: Nguyễn, Tuấn Anh, et al.
Publicat: (2024)

Optimizing HVOF spray process parameters to improve adhesion of WC-12Co coatings
per: Nguyễn, Thanh Phú, et al.
Publicat: (2024)

PREDICTION OF EFFECT CUTTING PARAMETERS AND HELIX ANGLE OF SOLID END MILL TO CUTTING FORCE IN MILLING
per: Hoàng, Tiến Dũng, et al.
Publicat: (2024)

A survey on determining the appropriate working parameters to improve the flatness of the road surface during the operation of the grader
per: Đào, Mạnh Quyền, et al.
Publicat: (2024)

Investigating the effect of speed humps’ dimension parameter to the comfort of sleeper coaches’ passengers using full car model
per: Nguyễn, Mạnh Trường, et al.
Publicat: (2024)

EFFECT OF LOOP LENGTH ON STRUCTURAL PARAMETERS OF COTTON SINGLE FABRIC KNITTED ON SHIMA SEIKI FLAT KNITTING MACHINE
per: Đào, Thị Chinh Thùy, et al.
Publicat: (2023)

STUDY THE EFFECT OF WELDING MODE PARAMETERS TO SHAPE AND SIZE OF WELDS WHEN WELDING ALUMINUM BY COLD WELDING METHOD
per: Vũ, Ngọc Thương, et al.
Publicat: (2024)

Studying the effect of welding parameters on tensile strength and geometry size of electroslag pressure weld joint applied in construction mechanical engineering
per: Hoàng, Đức Long, et al.
Publicat: (2024)

Study on effects of cutting parameters to the chip shrinkage coefficient and surface roughness when machining aluminum alloy A6061
per: Phạm, Thị Hoa, et al.
Publicat: (2024)

Historical record of European emissions of heavy metals to the atmosphere since the 1650s from alpine snow/ice cores drilled near Monte Rosa /

EFFECT OF OPERATIONAL PARAMETERS ON DEGRADATION OF JANUS GREEN B FROM AQUEOUS SOLUTION USING ZnO/ZHC/AC COMPOSITE
per: Nguyễn, Thị Vân, et al.
Publicat: (2024)