STUDY ON PERFORMANCE CHARACTERISTICS OF SERIAL HYBRID PROTOTYPE

QR-koodi

STUDY ON PERFORMANCE CHARACTERISTICS OF SERIAL HYBRID PROTOTYPE

Tallennettuna:

Bibliografiset tiedot
Päätekijät:	Bùi, Huy Hoàng, Nguyễn, Khắc Tùng, Nguyễn, Đức Khanh, Bùi, Văn Chinh, Nguyễn, Đức Nam
Aineistotyyppi:	Artikkeli
Kieli:	Vietnamese
Julkaistu:	2024
Aiheet:	Tạp chí Khoa học & Công nghệ - Đại học Công nghiệp Hà Nội
Linkit:	https://scholar.dlu.edu.vn/thuvienso/handle/DLU123456789/211580
Tagit:	Lisää tagi Ei tageja, Lisää ensimmäinen tagi!

Thư viện lưu trữ:	Thư viện Trường Đại học Đà Lạt

Samankaltaisia teoksia

STUDY ON DESIGN AND MANUFACTURE SERIAL HYBRID VEHICLE
Tekijä: Nguyễn, Khắc Tùng, et al.
Julkaistu: (2024)

The study simulates to design and calculate performance of three way catalystforautomobile engine
Tekijä: Nguyễn, Thế Lương, et al.
Julkaistu: (2024)

STUDY OF DESIGN AND MANUFACTURE OF THE CONTROLLER OF HYBRID POWERTRAIN SYSTEM
Tekijä: Pham, Van Kien, et al.
Julkaistu: (2025)

DATA TRANCEIVER PROTOTYPE OVER ICOM TRANSMISSION CHANNEL USED FOR SEA FISSHING BOATS
Tekijä: Dư, Đình Viên, et al.
Julkaistu: (2024)

STUDY ON THE ANTIBACTERIAL ABILITY OF THE HYBRID MATERIAL BETWEEN PORPHYRIN AND NANO SILVER
Tekijä: Vu, Thi Thao, et al.
Julkaistu: (2025)

Study on the influence of technological parameters on the friction characteristics of CrN hard coating was made by sputtering sputtering method on the SKD11 steel substrate
Tekijä: Trần, Văn Đua, et al.
Julkaistu: (2024)

Serial innovators :
Tekijä: Feser, Claudio
Julkaistu: (2012)

STUDY ON COMPOSITION, CHARACTERISTICS OF WASTE SLUDGE FROM NGHE AN SHRIMP RAISING-POND AND EVALUATION OF SLUDGE QUALITY FOR COMPOST PRODUCTION
Tekijä: Đỗ, Thị Cẩm Vân, et al.
Julkaistu: (2023)

STUDYING THE INFLUENCE OF THE NOZZLE PROFILE ON THE WORKING PERFORMANCE OF A SOLID-FUEL ROCKET ENGINE
Tekijä: Vo, Van Bien, et al.
Julkaistu: (2025)

Study on influence of technological parameters of percussion on the performance of dust extraction in experimental model of electrostatic precipitator
Tekijä: Nguyễn, Tiến Sỹ, et al.
Julkaistu: (2024)

FACTORS AFFECTING BUSINESS PERFORMANCE OF ENTERPRISES: A STUDY BASED ON VIETNAM LISTED CONSTRUCTION ENTERPRISES’S DATA
Tekijä: Đặng, Thị Hương, et al.
Julkaistu: (2024)

Simulating the aerodynamic characteristics of the bus models assembled in Vietnam
Tekijä: Đặng, Tiến Phúc, et al.
Julkaistu: (2024)

THE IMPACT OF THE ADDITION DIMETHYL ETHER ON INTAKE MANIFOLD TO THE PERFORMANCE AND THE ENVIRONMENT OF DIESEL ENGINE
Tekijä: Nguyễn, Công Đoàn, et al.
Julkaistu: (2024)

Evaluating the effectiveness of Topsis-Taguchi integration for the multi-characteristics optimization of technological parameters in PMEDM process
Tekijä: Nguyễn, Hữu Phấn, et al.
Julkaistu: (2024)

THE STUDY ON THE INFLUENCE OF LIQUIDITY RATIOS ON BUSINESS PERFORMANCE IN LISTED VIETNAMESE ENTERPRISES AMIDST THE COVID-19 CONTEXT
Tekijä: Le, Thi Thu Huong, et al.
Julkaistu: (2025)

STUDY ON IMPLEMENT OF BIOGAS ON SMALL GASOLINE GENERATOR SET IN HOME APPLICATION
Tekijä: Nguyễn, Khắc Tùng, et al.
Julkaistu: (2023)

CHARACTER BUILDING METHOD FROM PROTOTYPE IN WRITER NAM CAO'S SHORT STORIES BEFORE THE AUGUST REVOLUTION
Tekijä: Dang, Thuy An, et al.
Julkaistu: (2023)

Effective Prototyping with Excel
Tekijä: Berger, Nevin, et al.
Julkaistu: (2011)

CHARACTERISTICS STRUCTURAL MORPHOLOGY OF THE COMPOSITE MATERIALS POLYLACTIC ACID/CHITOSAN/QUININE SULFATE MANUFUCTERING BY MICRO-EMULSION METHOD
Tekijä: Hoàng, Thanh Đức, et al.
Julkaistu: (2023)

SIMULATION STUDY ON NOX REDUCTION VIA NITROGEN ENRICHED AIR (NEA) ON DIESEL ENGINES
Tekijä: Phạm, Văn Đoàn, et al.
Julkaistu: (2024)

STUDY ON CONVERSION OF CONVENTIONAL GENERATOR SET TO FUEL WITH GASES FROM BIOMASS
Tekijä: Nguyễn, Khắc Tùng
Julkaistu: (2023)

PERFORMANCE EVALUATION OF CI-VOFDM FOR PAPR REDUCING
Tekijä: Nguyễn, Diệu Linh, et al.
Julkaistu: (2024)

PERFORMANCE EVALUATION OF CI-VOFDM FOR PAPR REDUCING
Tekijä: Nguyễn, Diệu Linh, et al.
Julkaistu: (2024)

NGHIÊN CỨU BỘ ĐIỀU KHIỂN HYBRID PID CHO HỆ THỐNG TREO CHỦ ĐỘNG
Tekijä: Hoàng, Thăng Bình, et al.
Julkaistu: (2025)

STUDY ON CONVERSION OF CONVENTIONAL GENERATOR SET TO FUEL WITH GASES F-ROM BIOMASS
Tekijä: Nguyễn, Khắc Tùng
Julkaistu: (2024)

EVALUATING THE USE CEMENT TO REPLACE MINERAL POWDER IN IMPROVING THE CHARACTERISTIC OF HOT MIX ASPHALT
Tekijä: Lê, Văn Chăm, et al.
Julkaistu: (2023)

Rapid prototyping and engineering applications : A toolbox for prototype development
Tekijä: Liou, Frank W
Julkaistu: (2008)

APPLYLING SMITH PREDICTOR CONTROL METHOD TO IMPROVE THE PERFORMANCE OF THE HEAT TRANSFER PROCESS IN BEER PRODUCTION LINE
Tekijä: Nguyễn, Đức Dương
Julkaistu: (2024)

APPLYLING SMITH PREDICTOR CONTROL METHOD TO IMPROVE THE PERFORMANCE OF THE HEAT TRANSFER PROCESS IN BEER PRODUCTION LINE
Tekijä: Nguyễn, Đức Dương
Julkaistu: (2024)

EVALUATING PERFORMANCE OF CHIP MULTI-CORE WITH CACHE LEVEL
Tekijä: Nguyễn, Duy Việt, et al.
Julkaistu: (2024)

Serial innovators : Firms that change the world
Tekijä: Feser, Claudio
Julkaistu: (2012)

Experimental design and performance analysis when using the flank milling to machine the thin wall of aluminum alloy
Tekijä: Nguyễn, Như Tùng, et al.
Julkaistu: (2024)

Serial crime :
Julkaistu: (2006)

Serial innovators
Tekijä: Feser, Claudio

Pornography and Seriality
Tekijä: Schaschek, S.
Julkaistu: (2020)

C-HARACTER BUILDING METHOD F-ROM PROTOTYPE IN WRITER NAM CAO'S SHORT STORIES BEFORE THE AUGUST REVOLUTION
Tekijä: Dang, Thuy An, et al.
Julkaistu: (2024)

STUDY PERFORMANCE AND EMISSION OF AN EFI MOTORCYCLE SUPPLEMENTED WITH HYDROGEN-RICH GAS DIRIVED FROM ON-BOARD Cu-Ni/Al2O3 CATALYST AFTER RUNNING 5.000KM
Tekijä: Trần, Văn Hoàng, et al.
Julkaistu: (2024)

STUDY PERFORMANCE AND EMISSION OF AN EFI MOTORCYCLE SUPPLEMENTED WITH HYDROGEN-RICH GAS DIRIVED F-ROM ON-BOARD Cu-Ni/Al2O3 CATALYST AFTER RUNNING 5.000KM
Tekijä: Trần, Văn Hoàng, et al.
Julkaistu: (2024)

XÂY DỰNG MÔ HÌNH VÀ KHẢO SÁT HOẠT ĐỘNG CỦA PIN TRÊN Ô TÔ HYBRID
Tekijä: Nguyễn, Văn Tuân
Julkaistu: (2025)

Surveying the characteristic of US MK4-70MM rocket’s firing range on a self-propelled launcher tube
Tekijä: Trần, Quốc Trình, et al.
Julkaistu: (2024)