Research on the designation of seating position on coaches manufactured and assembled in Vietnam

QR-koodi

Research on the designation of seating position on coaches manufactured and assembled in Vietnam

Tallennettuna:

Bibliografiset tiedot
Päätekijä:	Đặng, Việt H�
Aineistotyyppi:	Artikkeli
Kieli:	Vietnamese
Julkaistu:	2024
Aiheet:	Tạp chí Khoa học & Công nghệ - Đại học Công nghiệp Hà Nội
Linkit:	https://scholar.dlu.edu.vn/thuvienso/handle/DLU123456789/211780
Tagit:	Lisää tagi Ei tageja, Lisää ensimmäinen tagi!

Thư viện lưu trữ:	Thư viện Trường Đại học Đà Lạt

Samankaltaisia teoksia

Research, design, manufacture laser engraving machine
Tekijä: Hoàng, Ngọc Hải, et al.
Julkaistu: (2024)

RESEARCHING, DESIGNING AND MANUFACTURING CRUDE FILTER SILOS FOR MANUFACTURING PETROLEUM AND DIESEL RESIDUE FILTRATION DEVICES BASED ON FLUID DYNAMICS PRINCIPLES
Tekijä: Phạm, Văn Bổng, et al.
Julkaistu: (2023)

Simulating the aerodynamic characteristics of the bus models assembled in Vietnam
Tekijä: Đặng, Tiến Phúc, et al.
Julkaistu: (2024)

Researching, designing, simulating, and manufacturing automatic knife changers of multiple-axed CNC machines
Tekijä: Nguyễn, Xuân Đạt, et al.
Julkaistu: (2024)

Simulating the aerodynamic c-haracteristics of the bus models assembled in Vietnam
Tekijä: Đặng, Tiến Phúc, et al.
Julkaistu: (2024)

STUDY ON DESIGN AND MANUFACTURE SERIAL HYBRID VEHICLE
Tekijä: Nguyễn, Khắc Tùng, et al.
Julkaistu: (2024)

Study design, manufacture of forklift VKT18
Tekijä: Vũ, Ngọc Thương, et al.
Julkaistu: (2024)

Designing and manufacturing wireless equipment for reliability inspection of automobile rear axles
Tekijä: Trần, Phúc Hòa, et al.
Julkaistu: (2024)

RESEARCH AND DEVELOPMENT OF SOFTWARE TO IMPROVE QUALITY FOR POSITION CONTROL SYSTEMS USING AC SERVO MITSUBISHI
Tekijä: Nguyễn, Đức Quang
Julkaistu: (2024)

A Study on the Dynamics of Blast Drilling Feeds Rotary and Pursue Driller’s holder manufactured in Vietnam
Tekijä: Bùi, Văn Trầm, et al.
Julkaistu: (2024)

Controller design for enhancement position accuracy of a rigid-flexible links robot by using particle warm optimization algorithm
Tekijä: Dương, Xuân Biên, et al.
Julkaistu: (2024)

RESEARCH OPTIMAL STRUCTURAL DESIGN FOR CRANES
Tekijä: Nguyễn, Hồng Tiến, et al.
Julkaistu: (2024)

Studying, designing and manufacturing the lubrication system control for hydrodynamics journal bearings with variable load and variable speed
Tekijä: Nguyễn, Văn Thắng, et al.
Julkaistu: (2024)

Studying, designing and manufacturing a laboratory equipment to determine coefficient of friction and wear intensity for different materials
Tekijä: Nguyễn, Văn Thắng, et al.
Julkaistu: (2024)

Design and manufacture of 3D circular rotary profile measuring equipment using laser scanning method
Tekijä: Lê, Xuân Cam, et al.
Julkaistu: (2024)

Investigating the effect of speed humps’ dimension parameter to the comfort of sleeper coaches’ passengers using full car model
Tekijä: Nguyễn, Mạnh Trường, et al.
Julkaistu: (2024)

RESEARCH AND DESIGN TRUCK MOBILE SLUDGE DEWATERING
Tekijä: Đào, Mạnh Hùng, et al.
Julkaistu: (2023)

Research of the manufacturing of open power flow test stands to test the durabilityof cardan shaft in light trucks’ transmission systems
Tekijä: Trần, Hữu Danh, et al.
Julkaistu: (2024)

EFFECTS OF FINANCIAL FACTORS ON THE CHOICE OF ACCOUNTING POLICY TO ADJUST PROFITABILITY: EVIDENCE FROM MANUFACTURING ENTERPRISES LISTED ON VIETNAM STOCK MARKET
Tekijä: Trương, Thanh Hằng, et al.
Julkaistu: (2024)

Building inverse dynamic models of the 4D CNC big size machines type shaft / table made by self-manufactured in Vietnam
Tekijä: Nguyễn, Quốc Hưng, et al.
Julkaistu: (2024)

EFFECTS OF FINANCIAL FACTORS ON THE CHOICE OF ACCOUNTING POLICY TO ADJUST PROFITABILITY: EVIDENCE F-ROM MANUFACTURING ENTERPRISES LISTED ON VIETNAM STOCK MARKET
Tekijä: Trương, Thanh Hằng, et al.
Julkaistu: (2024)

THE QUALITY OF NON-CASH PAYMENT SERVICES: RESEARCH AT COMMERCIAL BANKS IN VIETNAM
Tekijä: Nguyễn, Thị Nguyệt Dung, et al.
Julkaistu: (2024)

RESEARCH AND DESIGN OF WSNs FOR MEASURING SOME PARAMETERS IN THE ENVIRONMENT OF BUILDING BASEMENTS
Tekijä: Quách, Đức Cường, et al.
Julkaistu: (2023)

RESEARCH AND DESIGN OF WSNs FOR MEASURING SOME PARAMETERS IN THE ENVIRONMENT OF BUILDING BASEMENTS
Tekijä: Quách, Đức Cường, et al.
Julkaistu: (2024)

Manufacturing supporting devices for rotor balancing
Tekijä: Bùi, Minh Hiển
Julkaistu: (2024)

Researching, designing the tracking system for gun model using image processing technology
Tekijä: Vũ, Đức Linh, et al.
Julkaistu: (2024)

Modelling and controlling automatic manufacturing system using Petri net
Tekijä: Phạm, Trường Tùng, et al.
Julkaistu: (2024)

Using extended assembly algorithm in finite element method in building dynamic equation process of flexible robot
Tekijä: Dương, Xuân Biên, et al.
Julkaistu: (2024)

Masterful coaching :
Tekijä: Hargrove, Robert A.
Julkaistu: (2003)

Study on manufacturing a dual phase steel (DP)
Tekijä: Trần, Công Thức, et al.
Julkaistu: (2024)

RESEARCH ON ASSESSING THE IMPACT OF THE FOURTH INDUSTRIAL REVOLUTION ON VIETNAM'S LEATHER AND FOOTWEAR INDUSTRY TO 2030
Tekijä: Bùi, Văn Huấn, et al.
Julkaistu: (2024)

RESEARCH AND DESIGN OF POWER ELECTRONIC SYSTEMS APPLICATIONS IN SOLAR ENERGY SYSTEMS CONNECTED TO DISTRIBUTION GRID
Tekijä: Trịnh, Trọng Chưởng, et al.
Julkaistu: (2024)

MANUFACTURING, TESTING AND ENVIRONMENTAL SAFETY FOR MOTORIZED VEHICLES FOR MOTORIZED VEHICLES
Tekijä: Lê, Văn Anh, et al.
Julkaistu: (2024)

Manufacture and operation test of anti-slip braking system on motorcycles
Tekijä: Nguyễn, Sỹ An, et al.
Julkaistu: (2024)

RESEARCH AND DESIGN OF A MATHEMATICAL MODEL FOR AN INTERCONNECTED HYD-ROPOWER SYSTEM IN THE STABILIZATION PROBLEM OF TURBINE SPEED
Tekijä: Nguyễn, Duy Trung, et al.
Julkaistu: (2024)

Manufacturing the S10C-M steel from MIREX sponge iron
Tekijä: Đinh, Bá Trụ, et al.
Julkaistu: (2024)

A NEW STATE-SPACE MODEL OF THREE-PHASE POWER SYSTEMS: APPLICATION IN POSITIVE AND NEGATIVE SEQUENCE ESTIMATION
Tekijä: Phan, Anh Tuấn, et al.
Julkaistu: (2023)

Influence of joint clearance and linkage dimension deviation on the working position accuracy of output linkage in five-bar mechanism
Tekijä: Nguyễn, Văn Tuân, et al.
Julkaistu: (2024)

MANUFACTURE AND ANALYSIS OF CERAMIC TILES USED SUGAR CANE BAGASSE ASH MATERIAL
Tekijä: Nguyễn, Thị Thu Phương, et al.
Julkaistu: (2024)

Manufacturing the S10C-M steel f-rom MIREX sponge iron
Tekijä: Đinh, Bá Trụ, et al.
Julkaistu: (2024)