Simulation of welding temperature distribution, stress and distortion in GTAW process for T-joint

Κώδικας QR

Simulation of welding temperature distribution, stress and distortion in GTAW process for T-joint

Αποθηκεύτηκε σε:

Λεπτομέρειες βιβλιογραφικής εγγραφής
Κύριοι συγγραφείς:	Ngô, Thị Thảo, Nguyễn, Văn Toàn, Thân, Văn Thế
Μορφή:	Άρθρο
Γλώσσα:	Vietnamese
Έκδοση:	2024
Θέματα:	Tạp chí Khoa học & Công nghệ - Đại học Công nghiệp Hà Nội
Διαθέσιμο Online:	https://scholar.dlu.edu.vn/thuvienso/handle/DLU123456789/212024
Ετικέτες:	Προσθήκη ετικέτας Δεν υπάρχουν, Καταχωρήστε ετικέτα πρώτοι!

Thư viện lưu trữ:	Thư viện Trường Đại học Đà Lạt

Παρόμοια τεκμήρια

Analysis and simulation of temperature field during pipe joint welding using Sysweld software
ανά: Ngô, Hữu Mạnh, κ.ά.
Έκδοση: (2024)

Predicting residual stresses and distortions in welding 316L stainless steel pipes using Sysweld software
ανά: Nguyễn, Hồng Thanh, κ.ά.
Έκδοση: (2024)

Influences of annealing temperature on the mechanical properties of the welded joints in a aluminum alloy + aluminum + steel layered composite after explosive welding
ανά: Nguyễn, Ngọc Hưng, κ.ά.
Έκδοση: (2024)

Welding and distortion control
ανά: Mandal, N. R.
Έκδοση: (2004)

Temperature field when automatic arc welding under ceramic flux
ανά: Tăng, Bá Đại, κ.ά.
Έκδοση: (2024)

Studying the effect of welding parameters on tensile strength and geometry size of electroslag pressure weld joint applied in construction mechanical engineering
ανά: Hoàng, Đức Long, κ.ά.
Έκδοση: (2024)

Research the Microstructure of electroslag pressure weld joints used for reinforced steel in construction engineering
ανά: Hoàng, Đức Long, κ.ά.
Έκδοση: (2024)

Welding and distortion control(sach pho to coppy) /
ανά: R Mandal N
Έκδοση: (2004)

STUDY THE EFFECT OF WELDING MODE PARAMETERS TO SHAPE AND SIZE OF WELDS WHEN WELDING ALUMINUM BY COLD WELDING METHOD
ανά: Vũ, Ngọc Thương, κ.ά.
Έκδοση: (2024)

Lifetime Estimation of Welded Joints
ανά: Lagoda, Tadeusz
Έκδοση: (2020)

Research on the effect of MAG welding conditions to the shape and dimensions of butt welding
ανά: Nguyễn, Hồng Sơn, κ.ά.
Έκδοση: (2024)

STUDY THE EFFECT OF PRESSURE FORCE ON IMPACT TOUGHNESS OF WELDS WHEN FRICTION WELDING ROTATION
ανά: Vũ, Ngọc Thương, κ.ά.
Έκδοση: (2024)

Inverse determination of maximum heat flux and welding size in laser spot welding
ανά: Nguyễn, Quận, κ.ά.
Έκδοση: (2024)

Study on the influence of friction pressure and compression time on the tensile strength of the weld during rotation friction welding
ανά: Vũ, Ngọc Thương, κ.ά.
Έκδοση: (2024)

Determining reasonable welding parameters to reduce the width of heat-affected zone in TIG welding of aluminum alloys
ανά: Nguyễn, Tiến Dương
Έκδοση: (2024)

NUMERICAL SIMULATION ON ROTARY FRICTION WELDING OF TITANIUM ALLOY
ανά: Hồ, Thị Mỹ Nữ, κ.ά.
Έκδοση: (2024)

POLARIZATION AND CONDUCTION PROCESSES OF PEN FILM UNDER THERMO - ELECTRICAL STRESSES
ανά: Hoàng, Mai Quyền, κ.ά.
Έκδοση: (2024)

Numerical Simulation and Experimental Investigation of the Fracture Behaviour of an Electron Beam Welded Steel Joint. 1st ed. 2018
ανά: Tu, Haoyun
Έκδοση: (2020)

Friction stir welding of thixoformed AK4-1 aluminum alloy
ανά: Ngô, Thanh Bình, κ.ά.
Έκδοση: (2024)

Welding processes
ανά: P T Houlderoft
Έκδοση: (1967)

Research affect photos of the corner of the destination weld to the war size of MAG in the linked link
ανά: Nguyễn, Hồng Sơn
Έκδοση: (2024)

Development of a calculation program to design wagon wheelsets based on the reliability of redundant joints
ανά: Đỗ, Đức Tuấn, κ.ά.
Έκδοση: (2024)

Studying the relationship between temperature and surface roughness in grinding
ανά: Đỗ, Đức Trung, κ.ά.
Έκδοση: (2024)

FACTORS AFFECTING CREDIT QUALITY IN VIETNAM JOINT STOCK COMMERCIAL BANKS
ανά: Dương, Thị Hoàn
Έκδοση: (2023)

THE EFFECT OF TEMPERATURE ON THE DARK PROPERTIES OF PHOTOVOLTAIC SOLAR MODULES
ανά: Nguyễn, Thế Vĩnh, κ.ά.
Έκδοση: (2023)

Welding Handbook. Volume 2: Welding Processes, Part 1 /
ανά: Cary Howard B
Έκδοση: (2004)

Solid-State Welding: Friction and Friction Stir Welding Processes
ανά: Akinlabi, Esther Titilayo, κ.ά.
Έκδοση: (2020)

Nontariff distortions of trade :
Έκδοση: (1969)

THE EFFECT OF DISTORTION OF MERCATOR PROJECTION CHART ON SAFE NAVIGATION
ανά: Nguyễn, Thái Dương
Έκδοση: (2023)

THE EFFECT OF DISTORTION OF MERCATOR PROJECTION CHART ON SAFE NAVIGATION
ανά: Nguyễn, Thái Dương
Έκδοση: (2024)

Calculating the temperature field of marine gas turbine engines’ nozzle blades
ανά: Vũ, Đức Mạnh, κ.ά.
Έκδοση: (2024)

A STUDY AND DESIGN OF AN AUTOMATIC TEMPERATURE REDUCER FOR CARS PARKING IN THE SUNLIGHT
ανά: Nguyễn, Tiến Hán, κ.ά.
Έκδοση: (2024)

A STUDY AND DESIGN OF AN AUTOMATIC TEMPERATURE REDUCER FOR CARS PARKING IN THE SUNLIGHT
ανά: Nguyễn, Tiến Hán, κ.ά.
Έκδοση: (2024)

Theory of Thermomechanical Processes in Welding
ανά: Sluzalec, Andrzej
Έκδοση: (2020)

Laser Forming and Welding Processes
ανά: Yilbas, Bekir Sami, κ.ά.
Έκδοση: (2015)

Influence of joint clearance and linkage dimension deviation on the working position accuracy of output linkage in five-bar mechanism
ανά: Nguyễn, Văn Tuân, κ.ά.
Έκδοση: (2024)

Research on solutions to recover industrial fans operating in abrasive and high temperature conditions with air plasma thermal spray technology
ανά: Đặng, Xuân Thao, κ.ά.
Έκδοση: (2024)

Distortions to agricultural incentives in Asia
Έκδοση: (2009)

Simulating the aerodynamic characteristics of the bus models assembled in Vietnam
ανά: Đặng, Tiến Phúc, κ.ά.
Έκδοση: (2024)

Refrigeration cycle modelling: Application for simulating air conditioning system
ανά: Đặng, Hoàng Anh, κ.ά.
Έκδοση: (2024)