INFLUENCE OF Fe (II), Cu (II) ION IMPURITIES OF THE ZINC COATING

QR Code

INFLUENCE OF Fe (II), Cu (II) ION IMPURITIES OF THE ZINC COATING

Enregistré dans:

Détails bibliographiques
Auteurs principaux:	Phạm, Thị Thu Giang, Nguyễn, Thị Thanh Hương, Nguyễn, Ngọc Ánh
Format:	Article
Langue:	Vietnamese
Publié:	2023
Sujets:	Tạp chí Khoa học & Công nghệ - Đại học Công nghiệp Hà Nội
Accès en ligne:	https://sti.vista.gov.vn/tw/Pages/tai-lieu-khcn.aspx?ItemID=296511 https://scholar.dlu.edu.vn/thuvienso/handle/DLU123456789/127910
Tags:	Ajouter un tag Pas de tags, Soyez le premier à ajouter un tag!

Thư viện lưu trữ:	Thư viện Trường Đại học Đà Lạt

Documents similaires

REPARATION AND CHARACTERIZATION OF ZINC HIDROXYAPATITE COATINGS ON 316L STAINLESS STEEL
par: Vo, Thi Hanh, et autres
Publié: (2023)

Ion flotation of cadmium(II) and zinc(II) in the presence of proton-ionizable lariat ethers /

STUDY ON SYNTHESIS OF SOME BIS [3-ARYL-4-FORMYLSYDNONE N-(2’,3’,4’,6’-TETRA-O-ACETYL-β-D-GALATOPYRANOSYL) THIOSEMICARBAZONATO] ZINC(II) COMPLEXES
par: Hoàng, Thanh Đức
Publié: (2024)

INFLUENCE RESEARCH OF SURFACE ROUGHNESS OF THE C45 AND CT3 STELL TO QUANLITY OF ALUMINUM (Al) COATING BY THERMAL SPRAY METHOD
par: Phạm, Văn Liệu, et autres
Publié: (2023)

INFLUENCE RESEARCH OF SURFACE ROUGHNESS OF THE C45 AND CT3 STELL TO QUANLITY OF ALUMINUM (Al) COATING BY THERMAL SPRAY METHOD
par: Phạm, Văn Liệu, et autres
Publié: (2024)

NGHIÊN CỨU BIẾN TÍNH QUẶNG PYROLUSITE ỨNG DỤNG LÀM CHẤT HẤP PHỤ ĐỂ LOẠI BỎ ION KIM LOẠI Pb(II) VÀ Cd(II) TRONG NƯỚC
par: Phạm, Thị Thu Giang, et autres
Publié: (2025)

Preparation and properties of zinc oxide nanoparticles coated with zinc aluminate/

Study on the influence of technological parameters on the friction characteristics of CrN hard coating was made by sputtering sputtering method on the SKD11 steel substrate
par: Trần, Văn Đua, et autres
Publié: (2024)

Study on the influence of technological parameters on the friction c-haracteristics of CrN hard coating was made by sputtering sputtering method on the SKD11 steel substrate
par: Trần, Văn Đua, et autres
Publié: (2024)

STUDY THE INFLUENCE OF TECHNOLOGICAL PARAMETERS ON THE ADHESION OF THE CrN HARD COATING TO THE SKD11 STEEL SUBSTRATE WAS MADE BY DC PULSE MAGNETRON SPUTTERING METHOD
par: Tran, Van Dua, et autres
Publié: (2025)

EVALUATION OF Ni (II) ADSORPTION ON THE LIGNIN-POLYVINYL ALCOHOL ADSORBENT
par: Nguyễn, Ngọc Thanh, et autres
Publié: (2024)

Optimizing HVOF spray process parameters to improve adhesion of WC-12Co coatings
par: Nguyễn, Thanh Phú, et autres
Publié: (2024)

STUDY ON THE ADSORPTION OF Pb(II) IN AQUEOUS SOLUTION WITH MATERIAL BASED ON SULFONATED CARBON FROM SAWDUST
par: Nguyễn, Mạnh Hà, et autres
Publié: (2024)

STUDY ON THE ADSORPTION OF REACTIVE ORANGE RO122 FROM AQUEOUS SOLUTION ONTO CROSSLINKED CHITOSAN-COATED DIATOMITE
par: Lê, Thị Thi Hạ
Publié: (2023)

OPPORTUNITIES AND THREATS FOR COMMERCIAL BANKS IN VIETNAM WHEN THE CAPITAL ADEQUACY RATIO APPLIED UNDER BASEL II
par: Trần, Thị Lan Anh
Publié: (2024)

Research on fabrication of wear-resistant Ni/Al2O3 nanocomposite coating by selective electroplating
par: Đỗ, Thanh Tùng, et autres
Publié: (2024)

AN EVALUATION AND PROMOTION ON REDUCTION OF EMISSION FROM CURRENTLY USED MOTORBIKES IN VETNAM FOLLOWING EURO II STANDARD
par: Phạm, Văn Đoàn, et autres
Publié: (2024)

A new study for polishing the surface of Ni-P coated 20CrNi2Mo steel
par: Phùng, Xuân Sơn, et autres
Publié: (2024)

STUDY ON THE ADSORPTION OF REACTIVE ORANGE RO122 F-ROM AQUEOUS SOLUTION ONTO CROSSLINKED CHITOSAN-COATED DIATOMITE
par: Lê, Thị Thi Hạ
Publié: (2024)

STUDY ON THE ADSORPTION OF Pb(II) IN AQUEOUS SOLUTION WITH MATERIAL BASED ON SULFONATED CARBON F-ROM SAWDUST
par: Nguyễn, Mạnh Hà, et autres
Publié: (2024)

Research on fabrication of wear-resistant Ni/Al2O3 nanocomposite coating by se-lective electroplating
par: Đỗ, Thanh Tùng, et autres
Publié: (2024)

Effects of working pressure on structure and composition of TiAlN coating fabricated by co-sputtering deposition technique
par: Bùi, Tiến Sơn, et autres
Publié: (2024)

AN EVALUATION AND PROMOTION ON REDUCTION OF EMISSION F-ROM CURRENTLY USED MOTORBIKES IN VETNAM FOLLOWING EURO II STANDARD
par: Phạm, Văn Đoàn, et autres
Publié: (2024)

COMPARISON CHARACTERIZATIONS OF Cr (III) AND Cr (VI) CONVERSION COATING ON ZINC ELECTROPLATING SUBSTRATE
par: Hoang, Thi Huong Thuy
Publié: (2025)

THE INFLUENCE OF FACTORS ON PROCESS FOR THE PREPARATION OF SULFUR POLYMERS
par: Đỗ, Thị Huệ, et autres
Publié: (2024)

Using equivalent inclusion approach and FFT numerical simulation to determine the thermal conductivity of three phase material with doubly-coated inclusion
par: Nguyễn, Văn Luật
Publié: (2024)

Synthesis, characterization, and caesium adsorbent application of trigonal zinc hexacyanoferrate (II) nanoparticles
par: Nguyễn, Đình Trung, et autres
Publié: (2022)

Sử dụng vật liệu xúc tác nano ZnO trong quá trình ôzôn hóa để xử lý axit orange II
par: Nguyen, Hong Ngoc, et autres
Publié: (2023)

STUDY ON INFLUENCE OF SPANDEX CONTENT ON CVC SINGLE JERSEY FABRIC’S PHYSICO-MACHANICAL PROPERTIES
par: Nguyễn, Thị Tú Trinh, et autres
Publié: (2023)

STUDY ON INFLUENCE OF SPANDEX CONTENT ON CVC SINGLE JERSEY FABRIC’S PHYSICO-MACHANICAL PROPERTIES
par: Nguyễn, Thị Tú Trinh, et autres
Publié: (2024)

Stepwise grafting polyethyleneimine onto silica surface for Cu(II) removal
par: Mahmoud, Elsayed Hafez, et autres
Publié: (2025)

Impurities in semiconductors :
par: Fistul, Victor I.
Publié: (2004)

THE FACTORS INFLUENCING THE LEVEL OF INFORMATION DISCLOSURE BY STATE-OWNED ENTERPRISES IN VIETNAM
par: Nguyễn, Văn Linh, et autres
Publié: (2024)

INVESTIGATION OF BACK-PROPAGATION NETWORK STRUCTURES IN PREDICTING WEAR VALUE OF CBN-COATED TOOLS DURING HIGH-SPEED DRY TURNING OF SKD11 STEEL
par: Hoang, Thi Dieu, et autres
Publié: (2025)

STUDY ON THE INFLUENCE OF THE NOZZLE PROFILE ON THE RECOILLESS CONDITION OF THE RECOILLESS GUN
par: Nguyen, Minh Phu, et autres
Publié: (2025)

FACTORS INFLUENCING WORKING MOTIVATION OF EMPLOYEES AT THANH HOA SPORTS TRAINING AND COMPETITION CENTER
par: Cao, Thị Thanh, et autres
Publié: (2024)

RESEARCH ON SOME FACTORS INFLUENCING THE ADHESION, DRY TIME, SCRUB RESISTANCE OF POLYACRYLAT FILM
par: Nguyễn, Thế Hữu, et autres
Publié: (2024)

Experimental research on the influence of drying channel’s structural parameters on cassava morsel drying process
par: Nguyễn, Tuấn Anh, et autres
Publié: (2024)

INVESTIGATE THE INFLUENCE OF TOP TENSION YARN TO COTTON SINGLE JERSEY FABRIC PROPERTIES ON FLAT KNITTING MACHINE SHIMA SEIKI
par: Chu, Diệu Hương, et autres
Publié: (2023)

INVESTIGATE THE INFLUENCE OF TOP TENSION YARN TO COTTON SINGLE JERSEY FABRIC PROPERTIES ON FLAT KNITTING MACHINE SHIMA SEIKI
par: Chu, Diệu Hương, et autres
Publié: (2024)