MULTI-RESPONSES OPTIMIZATION OF DRY MILLING OF SKD61 FOR LOW CUTTING POWER AND SURFACE ROUGHNESS

QR-koodi

MULTI-RESPONSES OPTIMIZATION OF DRY MILLING OF SKD61 FOR LOW CUTTING POWER AND SURFACE ROUGHNESS

Tallennettuna:

Bibliografiset tiedot
Päätekijät:	Nguyễn, Trung Thành, Nguyễn, Tuấn Nhật
Aineistotyyppi:	Artikkeli
Kieli:	Vietnamese
Julkaistu:	2024
Aiheet:	Tạp chí Khoa học & Công nghệ - Đại học Công nghiệp Hà Nội
Linkit:	https://scholar.dlu.edu.vn/thuvienso/handle/DLU123456789/210915
Tagit:	Lisää tagi Ei tageja, Lisää ensimmäinen tagi!

Thư viện lưu trữ:	Thư viện Trường Đại học Đà Lạt

Samankaltaisia teoksia

Multi-objective optimization of SKD61 steel WEDM to improve cutting velocity and reduce surface roughness
Tekijä: Dương, Quốc Dũng, et al.
Julkaistu: (2024)

Optimization of cutting parameters for minimum the surface roughness when grinding SKD11 steel on cylindrical grinder
Tekijä: Trần, Quốc Hùng, et al.
Julkaistu: (2024)

THE EFFECT OF CUTTING VELOCITY (V) AND CUTTING DEPTH (t) ON SURFACE ROUGHNESS (Ra) WHEN MILLING ARCHIMEDES SURFACE ON THE CNC SUPER MC CENTER
Tekijä: Nguyễn, Huy Kiên, et al.
Julkaistu: (2024)

Influence of cutting parameters on surface roughness of workpiece when surface grinding SKD11 steel using Hai Duong grinding wheel
Tekijä: Nguyễn, Văn Thiện, et al.
Julkaistu: (2024)

STUDY ON THE INFLUENCE OF CUTTING PARAMETERS ON CONSUMPTION ENERGY AND SURFACE ROUGHNESS IN HIGH-SPEED FACE MILLING OF SKD11 STEEL AFTER HEAT TREATMENT USING ARTIFICIAL ECO-SYSTEM ALGORITHM
Tekijä: Dao, Van Duong, et al.
Julkaistu: (2025)

Studying the effects of cutting mode (S, t) on surface roughness (Ra) when milling Archimedes on CNC Center Super MC
Tekijä: Nguyễn, Huy Kiên, et al.
Julkaistu: (2024)

Predicting the effect of cutting parameters and helix angle of solid end mill to surface roughness when cutting on a CNC 5-axis machining center
Tekijä: Hoàng, Tiến Dũng, et al.
Julkaistu: (2024)

EFFECTS OF Al2O3 NANOCONCENTRATION AND CUTTING CONDITION ON SURFACE ROUGHNESS IN MQCL HARD MILLING OF HARDOX 500
Tekijä: Trần, Minh Đức, et al.
Julkaistu: (2023)

A STUDY ON SURFACE ROUGHNESS IN EDM MACHINING WITH COPPER ELECTRODE IN STAINLESS STEEL SKD11
Tekijä: Trần, Quang Huy, et al.
Julkaistu: (2024)

DEVELOP MODEL OF CUTTING FORCE WHEN MILLING 3D SURFACES BY BALL-END MILL
Tekijä: Đậu, Chí Dũng, et al.
Julkaistu: (2023)

Application of Taguchi - PSI combined to multi-response optimization of process parameters in die- sinking electrical discharge machining for SKD11 steel
Tekijä: Nguyễn, Văn Đức, et al.
Julkaistu: (2024)

Application of Taguchi - PSI combined to multi-response optimization of process parameters in die- sinking electrical disc-harge machining for SKD11 steel
Tekijä: Nguyễn, Văn Đức, et al.
Julkaistu: (2024)

Multi-objective optimization for high speed milling using PSO algorithm
Tekijä: Hoàng, Tiến Dũng, et al.
Julkaistu: (2024)

Studying the influence of technological parameters on surface roughness when machining C45 steel on CNC milling machine
Tekijä: Đỗ, Anh Tuấn, et al.
Julkaistu: (2024)

PREDICTION OF EFFECT CUTTING PARAMETERS AND HELIX ANGLE OF SOLID END MILL TO CUTTING FORCE IN MILLING
Tekijä: Hoàng, Tiến Dũng, et al.
Julkaistu: (2024)

MODELING AND OPTIMIZING SURFACE ROUGHNESS IN TURNING 40X STEEL BASED ON GENETIC PROGRAMMING AND GREY WOLF OPTIMIZATION ALGORITHMS
Tekijä: Duong, Xuan Bien, et al.
Julkaistu: (2025)

Studying the influence of pulse-on time and the pulse-off time on productivity and surface roughness for the heat treatment of SKD11 steel using pulse shaping with graphite electrodes
Tekijä: Trương, Chí Công, et al.
Julkaistu: (2024)

Study on effects of cutting parameters to the chip shrinkage coefficient and surface roughness when machining aluminum alloy A6061
Tekijä: Phạm, Thị Hoa, et al.
Julkaistu: (2024)

Application of response surface methodology for evaluating material removal in rate die-sinking EDM roughing using copper electrode
Julkaistu: (2024)

STUDY ON INFLUENCE OF CUTTING PARAMETERS (S, t) ON SURFACE ROUGHNESS OF TOOTH FLANK WHEN MACHINING GLEASON-CURVED TOOTHED TEETH USING CARBIDE-TIPPED TOOL
Tekijä: Hoàng, Xuân Thịnh, et al.
Julkaistu: (2024)

STUDY ON INFLUENCE OF CUTTING PARAMETERS (S, t) ON SURFACE ROUGHNESS OF TOOTH FLANK WHEN MACHINING GLEASON-CURVED TOOTHED TEETH USING CARBIDE-TIPPED TOOL
Tekijä: Hoàng, Xuân Thịnh, et al.
Julkaistu: (2024)

Studying the relationship between temperature and surface roughness in grinding
Tekijä: Đỗ, Đức Trung, et al.
Julkaistu: (2024)

MULTI-RESPONSE OPTIMIZATION OF EDD PROCESS OF DIE STEEL FOR IMPROVING PRODUCTION RATE AND HOLE QUALITY
Tekijä: Trần, Văn Tuấn, et al.
Julkaistu: (2023)

Predicting the surface roughness of workpiece in external plunge centerless grinding process
Tekijä: Đỗ, Đức Trung, et al.
Julkaistu: (2024)

Determining the Cutting Force Coefficients of FC25 grey iron when machining by a flat-end milling on CNC milling machine
Tekijä: Nguyễn, Như Tùng, et al.
Julkaistu: (2024)

Advanced Memory Optimization Techniques for Low-Power Embedded Processors
Tekijä: Verma, Manish, et al.
Julkaistu: (2020)

Nghiên cứu tối ưu các thông số mài phẳng để cải thiện độ nhám bề mặt của thép skd61
Tekijä: Phạm, Hữu Lộc
Julkaistu: (2025)

Optimization of Phaffia rhodozyma continuous culture through response surface methodology /
Tekijä: Vazquez, Manuel.

Response Surface Optimization of Ethanolic Extraction of Antioxidants from Artichoke Leaves
Tekijä: Uyen Thi Ngoc Ho, et al.
Julkaistu: (2022)

Surface roughness measurement using a polymer-based capacity micromachined ultrasonic transducer
Tekijä: Bùi, Gia Thịnh, et al.
Julkaistu: (2024)

Strength of light trucks under the impact of roads’surface roughness according to ISO standard
Tekijä: Trịnh, Minh Hoàng, et al.
Julkaistu: (2024)

INVESTIGATION OF BACK-PROPAGATION NETWORK STRUCTURES IN PREDICTING WEAR VALUE OF CBN-COATED TOOLS DURING HIGH-SPEED DRY TURNING OF SKD11 STEEL
Tekijä: Hoang, Thi Dieu, et al.
Julkaistu: (2025)

Application of Response Surface Methodology to optimize the process of saponification reaction from coconut oil in Ben Tre
Tekijä: Nguyễn, Thị Cẩm Trinh, et al.
Julkaistu: (2024)

Studying the effects of the bearing length on the surface roughness and extrusion pressure of extruded aluminum alloy bar
Tekijä: Nguyễn, Trọng Mai, et al.
Julkaistu: (2024)

More about the problem of cutting parameters optimization
Tekijä: Đào, Văn Hiệp
Julkaistu: (2024)

STUDY ON CHANGE OF SURFACE ROUGHNESS OF CAM WHEN MACHINED ON THE POLISHING MACHINE BK.CMPM.12
Tekijä: Phạm, Văn Hùng, et al.
Julkaistu: (2023)

MULTI-RESPONSE OPTIMIZATION OF PROCESS PARAMETERS IN DIE - SINKING ELECTRICAL DISCHGAGRE MACHINING USING TITANIUM POWDER INTO DIELECTRIC FLUID BY TOPSIS - TAGUCHI
Tekijä: Nguyễn, Hữu Phấn, et al.
Julkaistu: (2024)

Nghiên cứu cải tiến độ bóng bề mặt của thép skd61 sử dụng các thông số phay tối ưu bằng phương pháp taguchi
Tekijä: Phạm, Hữu Lộc
Julkaistu: (2025)

RESEARCH A INFLUENCE OF CUTTING REGIMES TO THE TOOL WEAR WHEN MILLING A GLEASON SPIRAL BEVEL GEAR
Tekijä: Hoàng, Xuân Thịnh, et al.
Julkaistu: (2023)

Assessing a response surface-based optimization approach for soil vapor extraction system design /
Tekijä: Fen, Chiu-Shia.