Research on fabrication of wear-resistant Ni/Al2O3 nanocomposite coating by selective electroplating

QR kód

Research on fabrication of wear-resistant Ni/Al2O3 nanocomposite coating by selective electroplating

Uloženo v:

Podrobná bibliografie
Hlavní autoři:	Đỗ, Thanh Tùng, Lê, Thu Quý, Lê, Đức Thành, Nguyễn, Anh Dũng
Médium:	Článek
Jazyk:	Vietnamese
Vydáno:	2024
Témata:	Tạp chí Khoa học & Công nghệ - Đại học Công nghiệp Hà Nội
On-line přístup:	https://scholar.dlu.edu.vn/thuvienso/handle/DLU123456789/211925
Tagy:	Přidat tag Žádné tagy, Buďte první, kdo otaguje tento záznam!

Thư viện lưu trữ:	Thư viện Trường Đại học Đà Lạt

Podobné jednotky

Research on fabrication of wear-resistant Ni/Al2O3 nanocomposite coating by se-lective electroplating
Autor: Đỗ, Thanh Tùng, a další
Vydáno: (2024)

Comparative performances of ni - sic composite coatings deposited by conventional and brush electroplating /

Comparative performances of Ni-SiC composite coatings deposited by conventional and brush electroplating
Autor: Bui, Thi Thao Nguyen, a další
Vydáno: (2024)

Effect of parameters on the electrodeposition of Ni-TiO2 nanocomposite coatings /
Autor: Le Thi Phuong Thao.

Effects of working pressure on structure and composition of TiAlN coating fabricated by co-sputtering deposition technique
Autor: Bùi, Tiến Sơn, a další
Vydáno: (2024)

COMPARISON CHARACTERIZATIONS OF Cr (III) AND Cr (VI) CONVERSION COATING ON ZINC ELECTROPLATING SUBSTRATE
Autor: Hoang, Thi Huong Thuy
Vydáno: (2025)

Chameleon coatings : Adaptive surfaces to reduce friction and wear in extreme environments /
Autor: Muratore, C.

INFLUENCE RESEARCH OF SURFACE ROUGHNESS OF THE C45 AND CT3 STELL TO QUANLITY OF ALUMINUM (Al) COATING BY THERMAL SPRAY METHOD
Autor: Phạm, Văn Liệu, a další
Vydáno: (2023)

INFLUENCE RESEARCH OF SURFACE ROUGHNESS OF THE C45 AND CT3 STELL TO QUANLITY OF ALUMINUM (Al) COATING BY THERMAL SPRAY METHOD
Autor: Phạm, Văn Liệu, a další
Vydáno: (2024)

RESEARCH EFFECTS OF THE WARP DENSITY AND WASHING PROCESS ON THE RESISTANCE OF DENIM FABRIC WITH THE WEFT CORE SPUN YARN
Autor: Giần, Thị Thu Hường, a další
Vydáno: (2023)

RESEARCH OF DETERMINATION THE COMFORT PRESSURE ON VIETNAMESE YOUTH FEMALES WEARING BRAS
Autor: Phan, Thanh Thảo, a další
Vydáno: (2024)

Preparation of kaolinite/titania coated nanocomposite particles and their electrorheological properties /
Autor: Wang, Baoxiang.

INVESTIGATION OF BACK-PROPAGATION NETWORK STRUCTURES IN PREDICTING WEAR VALUE OF CBN-COATED TOOLS DURING HIGH-SPEED DRY TURNING OF SKD11 STEEL
Autor: Hoang, Thi Dieu, a další
Vydáno: (2025)

A new study for polishing the surface of Ni-P coated 20CrNi2Mo steel
Autor: Phùng, Xuân Sơn, a další
Vydáno: (2024)

Fabrication of asymmetrically coated colloid particles by microcontact printing techniques /
Autor: Cayre, Olivier.

Reproducibility in fabrication and analytical performance of polyaniline-coated nanoelectrospray emitters /
Autor: White, Thomas P.

Textile fabrics and their selection
Autor: Isabel B Wingate
Vydáno: (1964)

Textile Fabrics and Their Selection /
Autor: Wingate, Isabel B.
Vydáno: (1964)

Textile fabrics and their selection /
Autor: Wingate, Isabel B.
Vydáno: (1964)

MANUFACTURE, STUDY ANTIBACTERIAL ABILITY OF FABRICS UNIFORM WAS COATED COLLOID SILVER NANO
Autor: Nguyễn, Thị Bích Hường, a další
Vydáno: (2024)

RESEARCH A INFLUENCE OF CUTTING REGIMES TO THE TOOL WEAR WHEN MILLING A GLEASON SPIRAL BEVEL GEAR
Autor: Hoàng, Xuân Thịnh, a další
Vydáno: (2023)

Study on fabrication of ZnO@TiO2 nanocomposite for perozone degradation of amoxicillin from aqueous solution
Autor: Thanh, Diem Ngo Thi, a další
Vydáno: (2025)

The method of studying the effect of some technology parameters on surface quality, wheel wear and machining capacity during the surface grinding of Ti-6Al-4V alloy with CBN grinding wheel
Autor: Phí, Trọng Hùng, a další
Vydáno: (2024)

THE INFLUENCE OF SOME PARAMETERS IN ATMOSPHERIC PLASMA SPRAY OF POWDER 85Ni15Al ON THE PARTICLE VELOCITY
Autor: Vu, Duong, a další
Vydáno: (2025)

Psychosocial Aspects of Niqab Wearing
Autor: Bosankic, N.
Vydáno: (2020)

The Right to Wear Religious Symbols
Autor: Hill, D., a další
Vydáno: (2020)

Fundamentals of Friction and Wear on the Nanoscale
Autor: Gnecco, Enrico, a další
Vydáno: (2016)

Fabrication of boehmite AlOOH and gamma-Al2O3 nanotubes via a soft solution route /

Measurement of yield strength for electroplated nickel film using micro-cantilever /
Autor: Moon, Hyoung-Sik.

Study on choosinglocomotive wheel - rail rolling contact theory for the wheel wear simulation
Autor: Tào, Văn Chiến
Vydáno: (2024)

INVESTIGATE THE EFFECT OF THE THROTTLING RING WEAR ON THE MOVEMENT OF THE ARTILLERY ON THE TANK WHEN FIRING
Autor: Tran, Van Tan, a další
Vydáno: (2025)

RESEARCH ON FABRICATION AND ARSENIC ADSORPTION OF POLY (VINYLDIENE FLOURIDE)/GRAPHENE OXIDE NANOFIBER MATS
Autor: Nguyễn, Thị Thu Thủy, a další
Vydáno: (2023)

RESEARCH ON FABRICATION AND ARSENIC ADSORPTION OF POLY (VINYLDIENE FLOURIDE)/GRAPHENE OXIDE NANOFIBER MATS
Autor: Nguyễn, Thị Thu Thủy, a další
Vydáno: (2024)

EPOXY RESIN, VINYL COPOLYMER, AND RICE HUSK SILICA BASED TERNARY NANOCOMPOSITES: FABRICATION, MECHANICAL CHARACTERISTICS, AND THERMAL AGING
Autor: Vu, Manh Cuong, a další
Vydáno: (2025)

Metric pattern cutting for women''s wear
Autor: Aldrich, Winifred
Vydáno: (2015)

Use-Wear and Residue Analysis in Archaeology
Autor: Marreiros, João Manuel, a další
Vydáno: (2020)

Use-Wear and Residue Analysis in Archaeology
Autor: Marreiros, João Manuel, a další
Vydáno: (2015)

Friction and Wear: Methodologies for Design and Control
Autor: Straffelini, Giovanni
Vydáno: (2015)

INVESTIGATED FOR THEIR EFFECT TO FRICTION AND WEAR PROPERTIES OF THE S45C STEEL AT UN-LUBRICATED CONDITION
Autor: Phạm, Đình Nhã, a další
Vydáno: (2024)

SYNTHESIS, CHARACTERIZATION AND ELECTROCHEMICAL PROPERTIES OF rGO/NiCo2S4 NANOCOMPOSITE FOR SUPERCAPACITOR APPLICATION
Autor: To, Van Nguyen, a další
Vydáno: (2025)