Simulation of welding temperature distribution, stress and distortion in GTAW process for T-joint

Codi QR

Simulation of welding temperature distribution, stress and distortion in GTAW process for T-joint

Guardat en:

Dades bibliogràfiques
Autors principals:	Ngô, Thị Thảo, Nguyễn, Văn Toàn, Thân, Văn Thế
Format:	Article
Idioma:	Vietnamese
Publicat:	2024
Matèries:	Tạp chí Khoa học & Công nghệ - Đại học Công nghiệp Hà Nội
Accés en línia:	https://scholar.dlu.edu.vn/thuvienso/handle/DLU123456789/212024
Etiquetes:	Afegir etiqueta Sense etiquetes, Sigues el primer a etiquetar aquest registre!

Thư viện lưu trữ:	Thư viện Trường Đại học Đà Lạt

Ítems similars

Analysis and simulation of temperature field during pipe joint welding using Sysweld software
per: Ngô, Hữu Mạnh, et al.
Publicat: (2024)

Predicting residual stresses and distortions in welding 316L stainless steel pipes using Sysweld software
per: Nguyễn, Hồng Thanh, et al.
Publicat: (2024)

Influences of annealing temperature on the mechanical properties of the welded joints in a aluminum alloy + aluminum + steel layered composite after explosive welding
per: Nguyễn, Ngọc Hưng, et al.
Publicat: (2024)

Welding and distortion control
per: Mandal, N. R.
Publicat: (2004)

Temperature field when automatic arc welding under ceramic flux
per: Tăng, Bá Đại, et al.
Publicat: (2024)

Studying the effect of welding parameters on tensile strength and geometry size of electroslag pressure weld joint applied in construction mechanical engineering
per: Hoàng, Đức Long, et al.
Publicat: (2024)

Research the Microstructure of electroslag pressure weld joints used for reinforced steel in construction engineering
per: Hoàng, Đức Long, et al.
Publicat: (2024)

Welding and distortion control(sach pho to coppy) /
per: R Mandal N
Publicat: (2004)

STUDY THE EFFECT OF WELDING MODE PARAMETERS TO SHAPE AND SIZE OF WELDS WHEN WELDING ALUMINUM BY COLD WELDING METHOD
per: Vũ, Ngọc Thương, et al.
Publicat: (2024)

Lifetime Estimation of Welded Joints
per: Lagoda, Tadeusz
Publicat: (2020)

Research on the effect of MAG welding conditions to the shape and dimensions of butt welding
per: Nguyễn, Hồng Sơn, et al.
Publicat: (2024)

STUDY THE EFFECT OF PRESSURE FORCE ON IMPACT TOUGHNESS OF WELDS WHEN FRICTION WELDING ROTATION
per: Vũ, Ngọc Thương, et al.
Publicat: (2024)

Inverse determination of maximum heat flux and welding size in laser spot welding
per: Nguyễn, Quận, et al.
Publicat: (2024)

Study on the influence of friction pressure and compression time on the tensile strength of the weld during rotation friction welding
per: Vũ, Ngọc Thương, et al.
Publicat: (2024)

Determining reasonable welding parameters to reduce the width of heat-affected zone in TIG welding of aluminum alloys
per: Nguyễn, Tiến Dương
Publicat: (2024)

NUMERICAL SIMULATION ON ROTARY FRICTION WELDING OF TITANIUM ALLOY
per: Hồ, Thị Mỹ Nữ, et al.
Publicat: (2024)

POLARIZATION AND CONDUCTION PROCESSES OF PEN FILM UNDER THERMO - ELECTRICAL STRESSES
per: Hoàng, Mai Quyền, et al.
Publicat: (2024)

Numerical Simulation and Experimental Investigation of the Fracture Behaviour of an Electron Beam Welded Steel Joint. 1st ed. 2018
per: Tu, Haoyun
Publicat: (2020)

Friction stir welding of thixoformed AK4-1 aluminum alloy
per: Ngô, Thanh Bình, et al.
Publicat: (2024)

Welding processes
per: P T Houlderoft
Publicat: (1967)

Research affect photos of the corner of the destination weld to the war size of MAG in the linked link
per: Nguyễn, Hồng Sơn
Publicat: (2024)

Development of a calculation program to design wagon wheelsets based on the reliability of redundant joints
per: Đỗ, Đức Tuấn, et al.
Publicat: (2024)

Studying the relationship between temperature and surface roughness in grinding
per: Đỗ, Đức Trung, et al.
Publicat: (2024)

FACTORS AFFECTING CREDIT QUALITY IN VIETNAM JOINT STOCK COMMERCIAL BANKS
per: Dương, Thị Hoàn
Publicat: (2023)

THE EFFECT OF TEMPERATURE ON THE DARK PROPERTIES OF PHOTOVOLTAIC SOLAR MODULES
per: Nguyễn, Thế Vĩnh, et al.
Publicat: (2023)

Welding Handbook. Volume 2: Welding Processes, Part 1 /
per: Cary Howard B
Publicat: (2004)

Solid-State Welding: Friction and Friction Stir Welding Processes
per: Akinlabi, Esther Titilayo, et al.
Publicat: (2020)

Nontariff distortions of trade :
Publicat: (1969)

THE EFFECT OF DISTORTION OF MERCATOR PROJECTION CHART ON SAFE NAVIGATION
per: Nguyễn, Thái Dương
Publicat: (2023)

THE EFFECT OF DISTORTION OF MERCATOR PROJECTION CHART ON SAFE NAVIGATION
per: Nguyễn, Thái Dương
Publicat: (2024)

Calculating the temperature field of marine gas turbine engines’ nozzle blades
per: Vũ, Đức Mạnh, et al.
Publicat: (2024)

A STUDY AND DESIGN OF AN AUTOMATIC TEMPERATURE REDUCER FOR CARS PARKING IN THE SUNLIGHT
per: Nguyễn, Tiến Hán, et al.
Publicat: (2024)

A STUDY AND DESIGN OF AN AUTOMATIC TEMPERATURE REDUCER FOR CARS PARKING IN THE SUNLIGHT
per: Nguyễn, Tiến Hán, et al.
Publicat: (2024)

Theory of Thermomechanical Processes in Welding
per: Sluzalec, Andrzej
Publicat: (2020)

Laser Forming and Welding Processes
per: Yilbas, Bekir Sami, et al.
Publicat: (2015)

Influence of joint clearance and linkage dimension deviation on the working position accuracy of output linkage in five-bar mechanism
per: Nguyễn, Văn Tuân, et al.
Publicat: (2024)

Research on solutions to recover industrial fans operating in abrasive and high temperature conditions with air plasma thermal spray technology
per: Đặng, Xuân Thao, et al.
Publicat: (2024)

Distortions to agricultural incentives in Asia
Publicat: (2009)

Simulating the aerodynamic characteristics of the bus models assembled in Vietnam
per: Đặng, Tiến Phúc, et al.
Publicat: (2024)

Refrigeration cycle modelling: Application for simulating air conditioning system
per: Đặng, Hoàng Anh, et al.
Publicat: (2024)