Simulation of welding temperature distribution, stress and distortion in GTAW process for T-joint

QR-koodi

Simulation of welding temperature distribution, stress and distortion in GTAW process for T-joint

Tallennettuna:

Bibliografiset tiedot
Päätekijät:	Ngô, Thị Thảo, Nguyễn, Văn Toàn, Thân, Văn Thế
Aineistotyyppi:	Artikkeli
Kieli:	Vietnamese
Julkaistu:	2024
Aiheet:	Tạp chí Khoa học & Công nghệ - Đại học Công nghiệp Hà Nội
Linkit:	https://scholar.dlu.edu.vn/thuvienso/handle/DLU123456789/212024
Tagit:	Lisää tagi Ei tageja, Lisää ensimmäinen tagi!

Thư viện lưu trữ:	Thư viện Trường Đại học Đà Lạt

Samankaltaisia teoksia

Analysis and simulation of temperature field during pipe joint welding using Sysweld software
Tekijä: Ngô, Hữu Mạnh, et al.
Julkaistu: (2024)

Predicting residual stresses and distortions in welding 316L stainless steel pipes using Sysweld software
Tekijä: Nguyễn, Hồng Thanh, et al.
Julkaistu: (2024)

Influences of annealing temperature on the mechanical properties of the welded joints in a aluminum alloy + aluminum + steel layered composite after explosive welding
Tekijä: Nguyễn, Ngọc Hưng, et al.
Julkaistu: (2024)

Welding and distortion control
Tekijä: Mandal, N. R.
Julkaistu: (2004)

Temperature field when automatic arc welding under ceramic flux
Tekijä: Tăng, Bá Đại, et al.
Julkaistu: (2024)

Studying the effect of welding parameters on tensile strength and geometry size of electroslag pressure weld joint applied in construction mechanical engineering
Tekijä: Hoàng, Đức Long, et al.
Julkaistu: (2024)

Research the Microstructure of electroslag pressure weld joints used for reinforced steel in construction engineering
Tekijä: Hoàng, Đức Long, et al.
Julkaistu: (2024)

Welding and distortion control(sach pho to coppy) /
Tekijä: R Mandal N
Julkaistu: (2004)

STUDY THE EFFECT OF WELDING MODE PARAMETERS TO SHAPE AND SIZE OF WELDS WHEN WELDING ALUMINUM BY COLD WELDING METHOD
Tekijä: Vũ, Ngọc Thương, et al.
Julkaistu: (2024)

Lifetime Estimation of Welded Joints
Tekijä: Lagoda, Tadeusz
Julkaistu: (2020)

Research on the effect of MAG welding conditions to the shape and dimensions of butt welding
Tekijä: Nguyễn, Hồng Sơn, et al.
Julkaistu: (2024)

STUDY THE EFFECT OF PRESSURE FORCE ON IMPACT TOUGHNESS OF WELDS WHEN FRICTION WELDING ROTATION
Tekijä: Vũ, Ngọc Thương, et al.
Julkaistu: (2024)

Inverse determination of maximum heat flux and welding size in laser spot welding
Tekijä: Nguyễn, Quận, et al.
Julkaistu: (2024)

Study on the influence of friction pressure and compression time on the tensile strength of the weld during rotation friction welding
Tekijä: Vũ, Ngọc Thương, et al.
Julkaistu: (2024)

Determining reasonable welding parameters to reduce the width of heat-affected zone in TIG welding of aluminum alloys
Tekijä: Nguyễn, Tiến Dương
Julkaistu: (2024)

NUMERICAL SIMULATION ON ROTARY FRICTION WELDING OF TITANIUM ALLOY
Tekijä: Hồ, Thị Mỹ Nữ, et al.
Julkaistu: (2024)

POLARIZATION AND CONDUCTION PROCESSES OF PEN FILM UNDER THERMO - ELECTRICAL STRESSES
Tekijä: Hoàng, Mai Quyền, et al.
Julkaistu: (2024)

Numerical Simulation and Experimental Investigation of the Fracture Behaviour of an Electron Beam Welded Steel Joint. 1st ed. 2018
Tekijä: Tu, Haoyun
Julkaistu: (2020)

Friction stir welding of thixoformed AK4-1 aluminum alloy
Tekijä: Ngô, Thanh Bình, et al.
Julkaistu: (2024)

Welding processes
Tekijä: P T Houlderoft
Julkaistu: (1967)

Research affect photos of the corner of the destination weld to the war size of MAG in the linked link
Tekijä: Nguyễn, Hồng Sơn
Julkaistu: (2024)

Development of a calculation program to design wagon wheelsets based on the reliability of redundant joints
Tekijä: Đỗ, Đức Tuấn, et al.
Julkaistu: (2024)

Studying the relationship between temperature and surface roughness in grinding
Tekijä: Đỗ, Đức Trung, et al.
Julkaistu: (2024)

FACTORS AFFECTING CREDIT QUALITY IN VIETNAM JOINT STOCK COMMERCIAL BANKS
Tekijä: Dương, Thị Hoàn
Julkaistu: (2023)

THE EFFECT OF TEMPERATURE ON THE DARK PROPERTIES OF PHOTOVOLTAIC SOLAR MODULES
Tekijä: Nguyễn, Thế Vĩnh, et al.
Julkaistu: (2023)

Welding Handbook. Volume 2: Welding Processes, Part 1 /
Tekijä: Cary Howard B
Julkaistu: (2004)

Solid-State Welding: Friction and Friction Stir Welding Processes
Tekijä: Akinlabi, Esther Titilayo, et al.
Julkaistu: (2020)

Nontariff distortions of trade :
Julkaistu: (1969)

THE EFFECT OF DISTORTION OF MERCATOR PROJECTION CHART ON SAFE NAVIGATION
Tekijä: Nguyễn, Thái Dương
Julkaistu: (2023)

THE EFFECT OF DISTORTION OF MERCATOR PROJECTION CHART ON SAFE NAVIGATION
Tekijä: Nguyễn, Thái Dương
Julkaistu: (2024)

Calculating the temperature field of marine gas turbine engines’ nozzle blades
Tekijä: Vũ, Đức Mạnh, et al.
Julkaistu: (2024)

A STUDY AND DESIGN OF AN AUTOMATIC TEMPERATURE REDUCER FOR CARS PARKING IN THE SUNLIGHT
Tekijä: Nguyễn, Tiến Hán, et al.
Julkaistu: (2024)

A STUDY AND DESIGN OF AN AUTOMATIC TEMPERATURE REDUCER FOR CARS PARKING IN THE SUNLIGHT
Tekijä: Nguyễn, Tiến Hán, et al.
Julkaistu: (2024)

Theory of Thermomechanical Processes in Welding
Tekijä: Sluzalec, Andrzej
Julkaistu: (2020)

Laser Forming and Welding Processes
Tekijä: Yilbas, Bekir Sami, et al.
Julkaistu: (2015)

Influence of joint clearance and linkage dimension deviation on the working position accuracy of output linkage in five-bar mechanism
Tekijä: Nguyễn, Văn Tuân, et al.
Julkaistu: (2024)

Research on solutions to recover industrial fans operating in abrasive and high temperature conditions with air plasma thermal spray technology
Tekijä: Đặng, Xuân Thao, et al.
Julkaistu: (2024)

Distortions to agricultural incentives in Asia
Julkaistu: (2009)

Simulating the aerodynamic characteristics of the bus models assembled in Vietnam
Tekijä: Đặng, Tiến Phúc, et al.
Julkaistu: (2024)

Refrigeration cycle modelling: Application for simulating air conditioning system
Tekijä: Đặng, Hoàng Anh, et al.
Julkaistu: (2024)