Study on the influence of technological parameters on the friction c-haracteristics of CrN hard coating was made by sputtering sputtering method on the SKD11 steel substrate

Mã QR

Study on the influence of technological parameters on the friction c-haracteristics of CrN hard coating was made by sputtering sputtering method on the SKD11 steel substrate

Đã lưu trong:

Bibliografiske detaljer
Những tác giả chính:	Trần, Văn Đua, Phạm, Đức Cường
Format:	Bài viết
Sprog:	Vietnamese
Udgivet:	2024
Fag:	Tạp chí Khoa học & Công nghệ - Đại học Công nghiệp Hà Nội
Online adgang:	https://scholar.dlu.edu.vn/thuvienso/handle/DLU123456789/250413
Tags:	Tilføj Tag Ingen Tags, Vær først til at tagge denne postø!

Thư viện lưu trữ:	Thư viện Trường Đại học Đà Lạt

Lignende værker

Study on the influence of technological parameters on the friction characteristics of CrN hard coating was made by sputtering sputtering method on the SKD11 steel substrate
af: Trần, Văn Đua, et al.
Udgivet: (2024)

STUDY THE INFLUENCE OF TECHNOLOGICAL PARAMETERS ON THE ADHESION OF THE CrN HARD COATING TO THE SKD11 STEEL SUBSTRATE WAS MADE BY DC PULSE MAGNETRON SPUTTERING METHOD
af: Tran, Van Dua, et al.
Udgivet: (2025)

The basics of sputtering third edition
Udgivet: (1958)

Vacuum technology, thin films, and sputtering
af: Stuart, R. V.
Udgivet: (1983)

Effects of working pressure on structure and composition of TiAlN coating fabricated by co-sputtering deposition technique
af: Bùi, Tiến Sơn, et al.
Udgivet: (2024)

COMPARISON CHARACTERIZATIONS OF Cr (III) AND Cr (VI) CONVERSION COATING ON ZINC ELECTROPLATING SUBSTRATE
af: Hoang, Thi Huong Thuy
Udgivet: (2025)

Preparation of transparent conducting Zn0: Al films on glass substrates by r.f magnetron sputtering : Chế tạo màng bán dẫn trong suốt Zn0: Al trên đế thủy tinh bằng phương pháp phún xạ magnetron /
af: Nguyen Duy Phuong.

Preparation of transparent conducting Zn0 :Al films on glass substrates by r.f magnetron sputtering = Chế tạo màng bán dẫn trong suốt Zn0 :Al trên đế thủy tinh bằng phương pháp phún xạ magnetron /
af: Nguyen Duy Phuong.

Tổng hợp màng tin bằng phương pháp Sputter- Ion- Plating (SIP)
af: Trần, Thế Hưởng
Udgivet: (2011)

ảnh hưởng của cấu trúc lớp AIBN lên cơ tính của vật liệu đa lớp CrN/AIBN/CrN
af: Nguyễn, Thị Trang, et al.
Udgivet: (2024)

Electrical characterizations of diodes fabricated on GaN and InGaN films by RF magnetron sputtering
af: Thi, Tran Anh Tuan
Udgivet: (2015)

Optimization of cutting parameters for minimum the surface roughness when grinding SKD11 steel on cylindrical grinder
af: Trần, Quốc Hùng, et al.
Udgivet: (2024)

Design of magnetron co-sputtering configuration for preparing magnesium tin silicide-based thermoelectric alloy thin films
Udgivet: (2023)

STUDY ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE AT THE INTERFACE BETWEEN 67Ni18Cr5Si4B HVOF THERMAL SPRAY COATING AND C45 STEEL SUBSTRATE
af: Phạm, Văn Liệu
Udgivet: (2023)

Enhancement of sputtering yields due to C60 versus ga bombardment of ag&111; as explored by molecular dynamics simulations /

Influence of indium and hydrogen co-doping on optical and electrical properties of zinc oxide thin films deposited by DC magnetron sputtering
Udgivet: (2023)

Influence of technological parameters on the abrasion strength of 40CrMo steel plasma nitride
af: Hoàng, Minh Thuận, et al.
Udgivet: (2024)

Photocatalytic activity, antibacterial effect, photoinduced hydrophilicity of TiO2 films coated on a stainless steel substrate /

A new study for polishing the surface of Ni-P coated 20CrNi2Mo steel
af: Phùng, Xuân Sơn, et al.
Udgivet: (2024)

Chameleon coatings : Adaptive surfaces to reduce friction and wear in extreme environments /
af: Muratore, C.

Influence of cutting parameters on surface roughness of workpiece when surface grinding SKD11 steel using Hai Duong grinding wheel
af: Nguyễn, Văn Thiện, et al.
Udgivet: (2024)

Application of Taguchi - PSI combined to multi-response optimization of process parameters in die- sinking electrical discharge machining for SKD11 steel
af: Nguyễn, Văn Đức, et al.
Udgivet: (2024)

INVESTIGATION OF BACK-PROPAGATION NETWORK STRUCTURES IN PREDICTING WEAR VALUE OF CBN-COATED TOOLS DURING HIGH-SPEED DRY TURNING OF SKD11 STEEL
af: Hoang, Thi Dieu, et al.
Udgivet: (2025)

Application of Taguchi - PSI combined to multi-response optimization of process parameters in die- sinking electrical disc-harge machining for SKD11 steel
af: Nguyễn, Văn Đức, et al.
Udgivet: (2024)

Resonance and nonresonant laser ionization of sputtered uranium atoms from thin films and single microparticles : Evaluation of a combined system for particle trace analysis /

Tổng hợp màng cứng CrN bằng phương pháp phún xạ mạ ion (SIP)
af: Đinh, Thị Mộng Cầm
Udgivet: (2011)

INVESTIGATED FOR THEIR EFFECT TO FRICTION AND WEAR PROPERTIES OF THE S45C STEEL AT UN-LUBRICATED CONDITION
af: Phạm, Đình Nhã, et al.
Udgivet: (2024)

STUDY ON THE INFLUENCE OF CUTTING PARAMETERS ON CONSUMPTION ENERGY AND SURFACE ROUGHNESS IN HIGH-SPEED FACE MILLING OF SKD11 STEEL AFTER HEAT TREATMENT USING ARTIFICIAL ECO-SYSTEM ALGORITHM
af: Dao, Van Duong, et al.
Udgivet: (2025)

Controllable preparation of patterns of aligned carbon nanotubes on metals and metal-coated silicon substrates /

A STUDY ON SURFACE ROUGHNESS IN EDM MACHINING WITH COPPER ELECTRODE IN STAINLESS STEEL SKD11
af: Trần, Quang Huy, et al.
Udgivet: (2024)

Effect of parameters on the electrodeposition of Ni-TiO2 nanocomposite coatings /
af: Le Thi Phuong Thao.

REPARATION AND CHARACTERIZATION OF ZINC HIDROXYAPATITE COATINGS ON 316L STAINLESS STEEL
af: Vo, Thi Hanh, et al.
Udgivet: (2023)

Multi-objective optimization of SKD61 steel WEDM to improve cutting velocity and reduce surface roughness
af: Dương, Quốc Dũng, et al.
Udgivet: (2024)

Evaluating the effectiveness of Topsis-Taguchi integration for the multi-c-haracteristics optimization of technological parameters in PMEDM process
af: Nguyễn, Hữu Phấn, et al.
Udgivet: (2024)

Optimizing HVOF spray process parameters to improve adhesion of WC-12Co coatings
af: Nguyễn, Thanh Phú, et al.
Udgivet: (2024)

Solid-State Welding: Friction and Friction Stir Welding Processes
af: Akinlabi, Esther Titilayo, et al.
Udgivet: (2020)

Fact and friction
af: Kenichi, Ohmae
Udgivet: (1990)

Hard Power in Hard Times
af: Matlary, Janne Haaland
Udgivet: (2020)

The hard thing about hard things :
af: Horowitz, Ben
Udgivet: (2014)

The hard thing about hard things :
af: Horowitz, Ben
Udgivet: (2011)