Clocking in Modern VLSI Systems

Codi QR

Clocking in Modern VLSI Systems

Guardat en:

Dades bibliogràfiques
Autor principal:	Xanthopoulos, Thucydides
Format:	Llibre
Idioma:	English
Publicat:	Springer US 2020
Matèries:	Engineering Circuits and Systems Electrical Engineering Computer-Aided Engineering (CAD, CAE) and Design
Accés en línia:	https://scholar.dlu.edu.vn/thuvienso/handle/DLU123456789/85315
Etiquetes:	Afegir etiqueta Sense etiquetes, Sigues el primer a etiquetar aquest registre!

Thư viện lưu trữ:	Thư viện Trường Đại học Đà Lạt

Ítems similars

Timing Optimization Through Clock Skew Scheduling
per: Kourtev, Ivan S., et al.
Publicat: (2020)

Routing Congestion in VLSI Circuits
per: Saxena, Prashant, et al.
Publicat: (2020)

Embedded System Design
per: Gajski, Daniel D., et al.
Publicat: (2020)

Rapid Prototyping of Digital Systems
per: Hamblen, James O., et al.
Publicat: (2020)

Functional Verification Coverage Measurement and Analysis
per: Piziali, Andrew
Publicat: (2020)

Creating Assertion-Based IP
per: Foster, Harry D., et al.
Publicat: (2020)

Assertion-Based Design
per: Foster, Harry D., et al.
Publicat: (2020)

Digital Design and Implementation with Field Programmable Devices
per: Navabi, Zainalabedin
Publicat: (2020)

Standardized Functional Verification
per: Wiemann, Alan
Publicat: (2020)

Open Verification Methodology Cookbook
per: Glasser, Mark
Publicat: (2020)

Verilog and SystemVerilog Gotchas
per: Sutherland, Stuart, et al.
Publicat: (2020)

Hardware Verification with System Verilog
per: Mintz, Mike, et al.
Publicat: (2020)

Global Specification and Validation of Embedded Systems
per: Nicolescu, G., et al.
Publicat: (2020)

Design of Embedded Control Systems
per: Adamski, Marian Andrzej, et al.
Publicat: (2020)

Nanosystems Design and Technology
per: DeMicheli, Giovanni, et al.
Publicat: (2020)

Full-Chip Nanometer Routing Techniques
per: Ho, Tsung-Yi, et al.
Publicat: (2020)

Functional Design Errors in Digital Circuits
per: Chang, Kai-hui, et al.
Publicat: (2020)

SystemVerilog for Verification
per: Spear, Chris
Publicat: (2020)

CMOS Active Inductors and Transformers
per: Yuan, Fei
Publicat: (2020)

Closing the Power Gap between ASIC & Custom
per: Chinnery, David, et al.
Publicat: (2020)

Inverse Problems in Electric Circuits and Electromagnetics
per: Korovkin, N.V., et al.
Publicat: (2020)

Design for Manufacturability and Statistical Design
per: Orshansky, Michael, et al.
Publicat: (2020)

Spotlight on Modern Transformer Design
per: Georgilakis, Pavlos Stylianos
Publicat: (2020)

Solid Modeling and Applications
per: Um, Dugan
Publicat: (2020)

Models for Computer Aided Tolerancing in Design and Manufacturing
per: Davidson, Joseph K.
Publicat: (2020)

Systematic Methodology for Real-Time Cost-Effective Mapping of Dynamic Concurrent Task-Based Systems on Heterogenous Platforms
per: Ma, Zhe, et al.
Publicat: (2020)

Millimeter-Wave Low Noise Amplifiers. 1st ed. 2018
per: Božanić, Mladen, et al.
Publicat: (2020)

Design for Manufacturability and Yield for Nano-Scale CMOS
per: Chiang, Charles, et al.
Publicat: (2020)

CMOS Current-Mode Circuits for Data Communications
per: Yuan, Fei
Publicat: (2020)

Nanometer Technology Designs
per: Ahmed, Nisar
Publicat: (2020)

Low-Power High-Level Synthesis for Nanoscale CMOS Circuits
per: Mohanty, Saraju P., et al.
Publicat: (2020)

Carbon Nanotube Electronics
per: Javey, Ali, et al.
Publicat: (2020)

Static Timing Analysis for Nanometer Designs
per: Bhasker, J., et al.
Publicat: (2020)

Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping
per: Nicolantonio, Massimo Di, et al.
Publicat: (2020)

Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future. 1st ed. 2018
per: Trzcielinski, Stefan
Publicat: (2020)

The Universal Generating Function in Reliability Analysis and Optimization
per: Levitin, Gregory
Publicat: (2020)

Computational Morphologies. 1st ed. 2018
per: Rossi, Michela, et al.
Publicat: (2020)

The Fuzzification of Systems
per: Seising, Rudolf
Publicat: (2020)

Designing Inclusive Futures
per: Langdon, P., et al.
Publicat: (2020)

3D Manufacturing Innovation
per: Toriya, Hiroshi
Publicat: (2020)