Research on fabrication of wear-resistant Ni/Al2O3 nanocomposite coating by selective electroplating

Côd QR

Research on fabrication of wear-resistant Ni/Al2O3 nanocomposite coating by selective electroplating

Wedi'i Gadw mewn:

Manylion Llyfryddiaeth
Prif Awduron:	Đỗ, Thanh Tùng, Lê, Thu Quý, Lê, Đức Thành, Nguyễn, Anh Dũng
Fformat:	Erthygl
Iaith:	Vietnamese
Cyhoeddwyd:	2024
Pynciau:	Tạp chí Khoa học & Công nghệ - Đại học Công nghiệp Hà Nội
Mynediad Ar-lein:	https://scholar.dlu.edu.vn/thuvienso/handle/DLU123456789/211925
Tagiau:	Ychwanegu Tag Dim Tagiau, Byddwch y cyntaf i dagio'r cofnod hwn!

Thư viện lưu trữ:	Thư viện Trường Đại học Đà Lạt

Eitemau Tebyg

Research on fabrication of wear-resistant Ni/Al2O3 nanocomposite coating by se-lective electroplating
gan: Đỗ, Thanh Tùng, et al.
Cyhoeddwyd: (2024)

Comparative performances of ni - sic composite coatings deposited by conventional and brush electroplating /

Comparative performances of Ni-SiC composite coatings deposited by conventional and brush electroplating
gan: Bui, Thi Thao Nguyen, et al.
Cyhoeddwyd: (2024)

Effect of parameters on the electrodeposition of Ni-TiO2 nanocomposite coatings /
gan: Le Thi Phuong Thao.

Effects of working pressure on structure and composition of TiAlN coating fabricated by co-sputtering deposition technique
gan: Bùi, Tiến Sơn, et al.
Cyhoeddwyd: (2024)

COMPARISON CHARACTERIZATIONS OF Cr (III) AND Cr (VI) CONVERSION COATING ON ZINC ELECTROPLATING SUBSTRATE
gan: Hoang, Thi Huong Thuy
Cyhoeddwyd: (2025)

Chameleon coatings : Adaptive surfaces to reduce friction and wear in extreme environments /
gan: Muratore, C.

INFLUENCE RESEARCH OF SURFACE ROUGHNESS OF THE C45 AND CT3 STELL TO QUANLITY OF ALUMINUM (Al) COATING BY THERMAL SPRAY METHOD
gan: Phạm, Văn Liệu, et al.
Cyhoeddwyd: (2023)

INFLUENCE RESEARCH OF SURFACE ROUGHNESS OF THE C45 AND CT3 STELL TO QUANLITY OF ALUMINUM (Al) COATING BY THERMAL SPRAY METHOD
gan: Phạm, Văn Liệu, et al.
Cyhoeddwyd: (2024)

RESEARCH EFFECTS OF THE WARP DENSITY AND WASHING PROCESS ON THE RESISTANCE OF DENIM FABRIC WITH THE WEFT CORE SPUN YARN
gan: Giần, Thị Thu Hường, et al.
Cyhoeddwyd: (2023)

RESEARCH OF DETERMINATION THE COMFORT PRESSURE ON VIETNAMESE YOUTH FEMALES WEARING BRAS
gan: Phan, Thanh Thảo, et al.
Cyhoeddwyd: (2024)

Preparation of kaolinite/titania coated nanocomposite particles and their electrorheological properties /
gan: Wang, Baoxiang.

INVESTIGATION OF BACK-PROPAGATION NETWORK STRUCTURES IN PREDICTING WEAR VALUE OF CBN-COATED TOOLS DURING HIGH-SPEED DRY TURNING OF SKD11 STEEL
gan: Hoang, Thi Dieu, et al.
Cyhoeddwyd: (2025)

A new study for polishing the surface of Ni-P coated 20CrNi2Mo steel
gan: Phùng, Xuân Sơn, et al.
Cyhoeddwyd: (2024)

Fabrication of asymmetrically coated colloid particles by microcontact printing techniques /
gan: Cayre, Olivier.

Reproducibility in fabrication and analytical performance of polyaniline-coated nanoelectrospray emitters /
gan: White, Thomas P.

Textile fabrics and their selection
gan: Isabel B Wingate
Cyhoeddwyd: (1964)

Textile Fabrics and Their Selection /
gan: Wingate, Isabel B.
Cyhoeddwyd: (1964)

Textile fabrics and their selection /
gan: Wingate, Isabel B.
Cyhoeddwyd: (1964)

MANUFACTURE, STUDY ANTIBACTERIAL ABILITY OF FABRICS UNIFORM WAS COATED COLLOID SILVER NANO
gan: Nguyễn, Thị Bích Hường, et al.
Cyhoeddwyd: (2024)

RESEARCH A INFLUENCE OF CUTTING REGIMES TO THE TOOL WEAR WHEN MILLING A GLEASON SPIRAL BEVEL GEAR
gan: Hoàng, Xuân Thịnh, et al.
Cyhoeddwyd: (2023)

Study on fabrication of ZnO@TiO2 nanocomposite for perozone degradation of amoxicillin from aqueous solution
gan: Thanh, Diem Ngo Thi, et al.
Cyhoeddwyd: (2025)

The method of studying the effect of some technology parameters on surface quality, wheel wear and machining capacity during the surface grinding of Ti-6Al-4V alloy with CBN grinding wheel
gan: Phí, Trọng Hùng, et al.
Cyhoeddwyd: (2024)

THE INFLUENCE OF SOME PARAMETERS IN ATMOSPHERIC PLASMA SPRAY OF POWDER 85Ni15Al ON THE PARTICLE VELOCITY
gan: Vu, Duong, et al.
Cyhoeddwyd: (2025)

Psychosocial Aspects of Niqab Wearing
gan: Bosankic, N.
Cyhoeddwyd: (2020)

The Right to Wear Religious Symbols
gan: Hill, D., et al.
Cyhoeddwyd: (2020)

Fundamentals of Friction and Wear on the Nanoscale
gan: Gnecco, Enrico, et al.
Cyhoeddwyd: (2016)

Fabrication of boehmite AlOOH and gamma-Al2O3 nanotubes via a soft solution route /

Measurement of yield strength for electroplated nickel film using micro-cantilever /
gan: Moon, Hyoung-Sik.

Study on choosinglocomotive wheel - rail rolling contact theory for the wheel wear simulation
gan: Tào, Văn Chiến
Cyhoeddwyd: (2024)

INVESTIGATE THE EFFECT OF THE THROTTLING RING WEAR ON THE MOVEMENT OF THE ARTILLERY ON THE TANK WHEN FIRING
gan: Tran, Van Tan, et al.
Cyhoeddwyd: (2025)

RESEARCH ON FABRICATION AND ARSENIC ADSORPTION OF POLY (VINYLDIENE FLOURIDE)/GRAPHENE OXIDE NANOFIBER MATS
gan: Nguyễn, Thị Thu Thủy, et al.
Cyhoeddwyd: (2023)

RESEARCH ON FABRICATION AND ARSENIC ADSORPTION OF POLY (VINYLDIENE FLOURIDE)/GRAPHENE OXIDE NANOFIBER MATS
gan: Nguyễn, Thị Thu Thủy, et al.
Cyhoeddwyd: (2024)

EPOXY RESIN, VINYL COPOLYMER, AND RICE HUSK SILICA BASED TERNARY NANOCOMPOSITES: FABRICATION, MECHANICAL CHARACTERISTICS, AND THERMAL AGING
gan: Vu, Manh Cuong, et al.
Cyhoeddwyd: (2025)

Metric pattern cutting for women''s wear
gan: Aldrich, Winifred
Cyhoeddwyd: (2015)

Use-Wear and Residue Analysis in Archaeology
gan: Marreiros, João Manuel, et al.
Cyhoeddwyd: (2020)

Use-Wear and Residue Analysis in Archaeology
gan: Marreiros, João Manuel, et al.
Cyhoeddwyd: (2015)

Friction and Wear: Methodologies for Design and Control
gan: Straffelini, Giovanni
Cyhoeddwyd: (2015)

INVESTIGATED FOR THEIR EFFECT TO FRICTION AND WEAR PROPERTIES OF THE S45C STEEL AT UN-LUBRICATED CONDITION
gan: Phạm, Đình Nhã, et al.
Cyhoeddwyd: (2024)

SYNTHESIS, CHARACTERIZATION AND ELECTROCHEMICAL PROPERTIES OF rGO/NiCo2S4 NANOCOMPOSITE FOR SUPERCAPACITOR APPLICATION
gan: To, Van Nguyen, et al.
Cyhoeddwyd: (2025)