Research on fabrication of wear-resistant Ni/Al2O3 nanocomposite coating by selective electroplating

QR Code (код быстрого отклика)

Research on fabrication of wear-resistant Ni/Al2O3 nanocomposite coating by selective electroplating

Сохранить в:

Библиографические подробности
Главные авторы:	Đỗ, Thanh Tùng, Lê, Thu Quý, Lê, Đức Thành, Nguyễn, Anh Dũng
Формат:	Статья
Язык:	Vietnamese
Опубликовано:	2024
Предметы:	Tạp chí Khoa học & Công nghệ - Đại học Công nghiệp Hà Nội
Online-ссылка:	https://scholar.dlu.edu.vn/thuvienso/handle/DLU123456789/211925
Метки:	Добавить метку Нет меток, Требуется 1-ая метка записи!

Thư viện lưu trữ:	Thư viện Trường Đại học Đà Lạt

Схожие документы

Research on fabrication of wear-resistant Ni/Al2O3 nanocomposite coating by se-lective electroplating
по: Đỗ, Thanh Tùng, et al.
Опубликовано: (2024)

Comparative performances of ni - sic composite coatings deposited by conventional and brush electroplating /

Comparative performances of Ni-SiC composite coatings deposited by conventional and brush electroplating
по: Bui, Thi Thao Nguyen, et al.
Опубликовано: (2024)

Effect of parameters on the electrodeposition of Ni-TiO2 nanocomposite coatings /
по: Le Thi Phuong Thao.

Effects of working pressure on structure and composition of TiAlN coating fabricated by co-sputtering deposition technique
по: Bùi, Tiến Sơn, et al.
Опубликовано: (2024)

COMPARISON CHARACTERIZATIONS OF Cr (III) AND Cr (VI) CONVERSION COATING ON ZINC ELECTROPLATING SUBSTRATE
по: Hoang, Thi Huong Thuy
Опубликовано: (2025)

Chameleon coatings : Adaptive surfaces to reduce friction and wear in extreme environments /
по: Muratore, C.

INFLUENCE RESEARCH OF SURFACE ROUGHNESS OF THE C45 AND CT3 STELL TO QUANLITY OF ALUMINUM (Al) COATING BY THERMAL SPRAY METHOD
по: Phạm, Văn Liệu, et al.
Опубликовано: (2023)

INFLUENCE RESEARCH OF SURFACE ROUGHNESS OF THE C45 AND CT3 STELL TO QUANLITY OF ALUMINUM (Al) COATING BY THERMAL SPRAY METHOD
по: Phạm, Văn Liệu, et al.
Опубликовано: (2024)

RESEARCH EFFECTS OF THE WARP DENSITY AND WASHING PROCESS ON THE RESISTANCE OF DENIM FABRIC WITH THE WEFT CORE SPUN YARN
по: Giần, Thị Thu Hường, et al.
Опубликовано: (2023)

RESEARCH OF DETERMINATION THE COMFORT PRESSURE ON VIETNAMESE YOUTH FEMALES WEARING BRAS
по: Phan, Thanh Thảo, et al.
Опубликовано: (2024)

Preparation of kaolinite/titania coated nanocomposite particles and their electrorheological properties /
по: Wang, Baoxiang.

INVESTIGATION OF BACK-PROPAGATION NETWORK STRUCTURES IN PREDICTING WEAR VALUE OF CBN-COATED TOOLS DURING HIGH-SPEED DRY TURNING OF SKD11 STEEL
по: Hoang, Thi Dieu, et al.
Опубликовано: (2025)

A new study for polishing the surface of Ni-P coated 20CrNi2Mo steel
по: Phùng, Xuân Sơn, et al.
Опубликовано: (2024)

Fabrication of asymmetrically coated colloid particles by microcontact printing techniques /
по: Cayre, Olivier.

Reproducibility in fabrication and analytical performance of polyaniline-coated nanoelectrospray emitters /
по: White, Thomas P.

Textile fabrics and their selection
по: Isabel B Wingate
Опубликовано: (1964)

Textile Fabrics and Their Selection /
по: Wingate, Isabel B.
Опубликовано: (1964)

Textile fabrics and their selection /
по: Wingate, Isabel B.
Опубликовано: (1964)

MANUFACTURE, STUDY ANTIBACTERIAL ABILITY OF FABRICS UNIFORM WAS COATED COLLOID SILVER NANO
по: Nguyễn, Thị Bích Hường, et al.
Опубликовано: (2024)

RESEARCH A INFLUENCE OF CUTTING REGIMES TO THE TOOL WEAR WHEN MILLING A GLEASON SPIRAL BEVEL GEAR
по: Hoàng, Xuân Thịnh, et al.
Опубликовано: (2023)

Study on fabrication of ZnO@TiO2 nanocomposite for perozone degradation of amoxicillin from aqueous solution
по: Thanh, Diem Ngo Thi, et al.
Опубликовано: (2025)

The method of studying the effect of some technology parameters on surface quality, wheel wear and machining capacity during the surface grinding of Ti-6Al-4V alloy with CBN grinding wheel
по: Phí, Trọng Hùng, et al.
Опубликовано: (2024)

THE INFLUENCE OF SOME PARAMETERS IN ATMOSPHERIC PLASMA SPRAY OF POWDER 85Ni15Al ON THE PARTICLE VELOCITY
по: Vu, Duong, et al.
Опубликовано: (2025)

Psychosocial Aspects of Niqab Wearing
по: Bosankic, N.
Опубликовано: (2020)

The Right to Wear Religious Symbols
по: Hill, D., et al.
Опубликовано: (2020)

Fundamentals of Friction and Wear on the Nanoscale
по: Gnecco, Enrico, et al.
Опубликовано: (2016)

Fabrication of boehmite AlOOH and gamma-Al2O3 nanotubes via a soft solution route /

Measurement of yield strength for electroplated nickel film using micro-cantilever /
по: Moon, Hyoung-Sik.

Study on choosinglocomotive wheel - rail rolling contact theory for the wheel wear simulation
по: Tào, Văn Chiến
Опубликовано: (2024)

INVESTIGATE THE EFFECT OF THE THROTTLING RING WEAR ON THE MOVEMENT OF THE ARTILLERY ON THE TANK WHEN FIRING
по: Tran, Van Tan, et al.
Опубликовано: (2025)

RESEARCH ON FABRICATION AND ARSENIC ADSORPTION OF POLY (VINYLDIENE FLOURIDE)/GRAPHENE OXIDE NANOFIBER MATS
по: Nguyễn, Thị Thu Thủy, et al.
Опубликовано: (2023)

RESEARCH ON FABRICATION AND ARSENIC ADSORPTION OF POLY (VINYLDIENE FLOURIDE)/GRAPHENE OXIDE NANOFIBER MATS
по: Nguyễn, Thị Thu Thủy, et al.
Опубликовано: (2024)

EPOXY RESIN, VINYL COPOLYMER, AND RICE HUSK SILICA BASED TERNARY NANOCOMPOSITES: FABRICATION, MECHANICAL CHARACTERISTICS, AND THERMAL AGING
по: Vu, Manh Cuong, et al.
Опубликовано: (2025)

Metric pattern cutting for women''s wear
по: Aldrich, Winifred
Опубликовано: (2015)

Use-Wear and Residue Analysis in Archaeology
по: Marreiros, João Manuel, et al.
Опубликовано: (2020)

Use-Wear and Residue Analysis in Archaeology
по: Marreiros, João Manuel, et al.
Опубликовано: (2015)

Friction and Wear: Methodologies for Design and Control
по: Straffelini, Giovanni
Опубликовано: (2015)

INVESTIGATED FOR THEIR EFFECT TO FRICTION AND WEAR PROPERTIES OF THE S45C STEEL AT UN-LUBRICATED CONDITION
по: Phạm, Đình Nhã, et al.
Опубликовано: (2024)

SYNTHESIS, CHARACTERIZATION AND ELECTROCHEMICAL PROPERTIES OF rGO/NiCo2S4 NANOCOMPOSITE FOR SUPERCAPACITOR APPLICATION
по: To, Van Nguyen, et al.
Опубликовано: (2025)