Study on the influence of technological parameters on the friction c-haracteristics of CrN hard coating was made by sputtering sputtering method on the SKD11 steel substrate

Mã QR

Study on the influence of technological parameters on the friction c-haracteristics of CrN hard coating was made by sputtering sputtering method on the SKD11 steel substrate

שמור ב:

מידע ביבליוגרפי
Những tác giả chính:	Trần, Văn Đua, Phạm, Đức Cường
פורמט:	Bài viết
שפה:	Vietnamese
יצא לאור:	2024
נושאים:	Tạp chí Khoa học & Công nghệ - Đại học Công nghiệp Hà Nội
גישה מקוונת:	https://scholar.dlu.edu.vn/thuvienso/handle/DLU123456789/250413
תגים:	הוספת תג אין תגיות, היה/י הראשונ/ה לתייג את הרשומה!

Thư viện lưu trữ:	Thư viện Trường Đại học Đà Lạt

פריטים דומים

Study on the influence of technological parameters on the friction characteristics of CrN hard coating was made by sputtering sputtering method on the SKD11 steel substrate
מאת: Trần, Văn Đua, et al.
יצא לאור: (2024)

STUDY THE INFLUENCE OF TECHNOLOGICAL PARAMETERS ON THE ADHESION OF THE CrN HARD COATING TO THE SKD11 STEEL SUBSTRATE WAS MADE BY DC PULSE MAGNETRON SPUTTERING METHOD
מאת: Tran, Van Dua, et al.
יצא לאור: (2025)

The basics of sputtering third edition
יצא לאור: (1958)

Vacuum technology, thin films, and sputtering
מאת: Stuart, R. V.
יצא לאור: (1983)

Effects of working pressure on structure and composition of TiAlN coating fabricated by co-sputtering deposition technique
מאת: Bùi, Tiến Sơn, et al.
יצא לאור: (2024)

COMPARISON CHARACTERIZATIONS OF Cr (III) AND Cr (VI) CONVERSION COATING ON ZINC ELECTROPLATING SUBSTRATE
מאת: Hoang, Thi Huong Thuy
יצא לאור: (2025)

Preparation of transparent conducting Zn0: Al films on glass substrates by r.f magnetron sputtering : Chế tạo màng bán dẫn trong suốt Zn0: Al trên đế thủy tinh bằng phương pháp phún xạ magnetron /
מאת: Nguyen Duy Phuong.

Preparation of transparent conducting Zn0 :Al films on glass substrates by r.f magnetron sputtering = Chế tạo màng bán dẫn trong suốt Zn0 :Al trên đế thủy tinh bằng phương pháp phún xạ magnetron /
מאת: Nguyen Duy Phuong.

Tổng hợp màng tin bằng phương pháp Sputter- Ion- Plating (SIP)
מאת: Trần, Thế Hưởng
יצא לאור: (2011)

ảnh hưởng của cấu trúc lớp AIBN lên cơ tính của vật liệu đa lớp CrN/AIBN/CrN
מאת: Nguyễn, Thị Trang, et al.
יצא לאור: (2024)

Electrical characterizations of diodes fabricated on GaN and InGaN films by RF magnetron sputtering
מאת: Thi, Tran Anh Tuan
יצא לאור: (2015)

Optimization of cutting parameters for minimum the surface roughness when grinding SKD11 steel on cylindrical grinder
מאת: Trần, Quốc Hùng, et al.
יצא לאור: (2024)

Design of magnetron co-sputtering configuration for preparing magnesium tin silicide-based thermoelectric alloy thin films
יצא לאור: (2023)

STUDY ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE AT THE INTERFACE BETWEEN 67Ni18Cr5Si4B HVOF THERMAL SPRAY COATING AND C45 STEEL SUBSTRATE
מאת: Phạm, Văn Liệu
יצא לאור: (2023)

Enhancement of sputtering yields due to C60 versus ga bombardment of ag&111; as explored by molecular dynamics simulations /

Influence of indium and hydrogen co-doping on optical and electrical properties of zinc oxide thin films deposited by DC magnetron sputtering
יצא לאור: (2023)

Influence of technological parameters on the abrasion strength of 40CrMo steel plasma nitride
מאת: Hoàng, Minh Thuận, et al.
יצא לאור: (2024)

Photocatalytic activity, antibacterial effect, photoinduced hydrophilicity of TiO2 films coated on a stainless steel substrate /

A new study for polishing the surface of Ni-P coated 20CrNi2Mo steel
מאת: Phùng, Xuân Sơn, et al.
יצא לאור: (2024)

Chameleon coatings : Adaptive surfaces to reduce friction and wear in extreme environments /
מאת: Muratore, C.

Influence of cutting parameters on surface roughness of workpiece when surface grinding SKD11 steel using Hai Duong grinding wheel
מאת: Nguyễn, Văn Thiện, et al.
יצא לאור: (2024)

Application of Taguchi - PSI combined to multi-response optimization of process parameters in die- sinking electrical discharge machining for SKD11 steel
מאת: Nguyễn, Văn Đức, et al.
יצא לאור: (2024)

INVESTIGATION OF BACK-PROPAGATION NETWORK STRUCTURES IN PREDICTING WEAR VALUE OF CBN-COATED TOOLS DURING HIGH-SPEED DRY TURNING OF SKD11 STEEL
מאת: Hoang, Thi Dieu, et al.
יצא לאור: (2025)

Application of Taguchi - PSI combined to multi-response optimization of process parameters in die- sinking electrical disc-harge machining for SKD11 steel
מאת: Nguyễn, Văn Đức, et al.
יצא לאור: (2024)

Resonance and nonresonant laser ionization of sputtered uranium atoms from thin films and single microparticles : Evaluation of a combined system for particle trace analysis /

Tổng hợp màng cứng CrN bằng phương pháp phún xạ mạ ion (SIP)
מאת: Đinh, Thị Mộng Cầm
יצא לאור: (2011)

INVESTIGATED FOR THEIR EFFECT TO FRICTION AND WEAR PROPERTIES OF THE S45C STEEL AT UN-LUBRICATED CONDITION
מאת: Phạm, Đình Nhã, et al.
יצא לאור: (2024)

STUDY ON THE INFLUENCE OF CUTTING PARAMETERS ON CONSUMPTION ENERGY AND SURFACE ROUGHNESS IN HIGH-SPEED FACE MILLING OF SKD11 STEEL AFTER HEAT TREATMENT USING ARTIFICIAL ECO-SYSTEM ALGORITHM
מאת: Dao, Van Duong, et al.
יצא לאור: (2025)

Controllable preparation of patterns of aligned carbon nanotubes on metals and metal-coated silicon substrates /

A STUDY ON SURFACE ROUGHNESS IN EDM MACHINING WITH COPPER ELECTRODE IN STAINLESS STEEL SKD11
מאת: Trần, Quang Huy, et al.
יצא לאור: (2024)

Effect of parameters on the electrodeposition of Ni-TiO2 nanocomposite coatings /
מאת: Le Thi Phuong Thao.

REPARATION AND CHARACTERIZATION OF ZINC HIDROXYAPATITE COATINGS ON 316L STAINLESS STEEL
מאת: Vo, Thi Hanh, et al.
יצא לאור: (2023)

Multi-objective optimization of SKD61 steel WEDM to improve cutting velocity and reduce surface roughness
מאת: Dương, Quốc Dũng, et al.
יצא לאור: (2024)

Evaluating the effectiveness of Topsis-Taguchi integration for the multi-c-haracteristics optimization of technological parameters in PMEDM process
מאת: Nguyễn, Hữu Phấn, et al.
יצא לאור: (2024)

Optimizing HVOF spray process parameters to improve adhesion of WC-12Co coatings
מאת: Nguyễn, Thanh Phú, et al.
יצא לאור: (2024)

Solid-State Welding: Friction and Friction Stir Welding Processes
מאת: Akinlabi, Esther Titilayo, et al.
יצא לאור: (2020)

Fact and friction
מאת: Kenichi, Ohmae
יצא לאור: (1990)

Hard Power in Hard Times
מאת: Matlary, Janne Haaland
יצא לאור: (2020)

The hard thing about hard things :
מאת: Horowitz, Ben
יצא לאור: (2014)

The hard thing about hard things :
מאת: Horowitz, Ben
יצא לאור: (2011)