Study on the influence of technological parameters on the friction c-haracteristics of CrN hard coating was made by sputtering sputtering method on the SKD11 steel substrate

क्यूआर कोड

Study on the influence of technological parameters on the friction c-haracteristics of CrN hard coating was made by sputtering sputtering method on the SKD11 steel substrate

में बचाया:

ग्रंथसूची विवरण
मुख्य लेखकों:	Trần, Văn Đua, Phạm, Đức Cường
स्वरूप:	लेख
भाषा:	Vietnamese
प्रकाशित:	2024
विषय:	Tạp chí Khoa học & Công nghệ - Đại học Công nghiệp Hà Nội
ऑनलाइन पहुंच:	https://scholar.dlu.edu.vn/thuvienso/handle/DLU123456789/250413
टैग :	टैग जोड़ें कोई टैग नहीं, इस रिकॉर्ड को टैग करने वाले पहले व्यक्ति बनें!

Thư viện lưu trữ:	Thư viện Trường Đại học Đà Lạt

समान संसाधन

Study on the influence of technological parameters on the friction characteristics of CrN hard coating was made by sputtering sputtering method on the SKD11 steel substrate
द्वारा: Trần, Văn Đua, और अन्य
प्रकाशित: (2024)

STUDY THE INFLUENCE OF TECHNOLOGICAL PARAMETERS ON THE ADHESION OF THE CrN HARD COATING TO THE SKD11 STEEL SUBSTRATE WAS MADE BY DC PULSE MAGNETRON SPUTTERING METHOD
द्वारा: Tran, Van Dua, और अन्य
प्रकाशित: (2025)

The basics of sputtering third edition
प्रकाशित: (1958)

Vacuum technology, thin films, and sputtering
द्वारा: Stuart, R. V.
प्रकाशित: (1983)

Effects of working pressure on structure and composition of TiAlN coating fabricated by co-sputtering deposition technique
द्वारा: Bùi, Tiến Sơn, और अन्य
प्रकाशित: (2024)

COMPARISON CHARACTERIZATIONS OF Cr (III) AND Cr (VI) CONVERSION COATING ON ZINC ELECTROPLATING SUBSTRATE
द्वारा: Hoang, Thi Huong Thuy
प्रकाशित: (2025)

Preparation of transparent conducting Zn0: Al films on glass substrates by r.f magnetron sputtering : Chế tạo màng bán dẫn trong suốt Zn0: Al trên đế thủy tinh bằng phương pháp phún xạ magnetron /
द्वारा: Nguyen Duy Phuong.

Preparation of transparent conducting Zn0 :Al films on glass substrates by r.f magnetron sputtering = Chế tạo màng bán dẫn trong suốt Zn0 :Al trên đế thủy tinh bằng phương pháp phún xạ magnetron /
द्वारा: Nguyen Duy Phuong.

Tổng hợp màng tin bằng phương pháp Sputter- Ion- Plating (SIP)
द्वारा: Trần, Thế Hưởng
प्रकाशित: (2011)

ảnh hưởng của cấu trúc lớp AIBN lên cơ tính của vật liệu đa lớp CrN/AIBN/CrN
द्वारा: Nguyễn, Thị Trang, और अन्य
प्रकाशित: (2024)

Electrical characterizations of diodes fabricated on GaN and InGaN films by RF magnetron sputtering
द्वारा: Thi, Tran Anh Tuan
प्रकाशित: (2015)

Optimization of cutting parameters for minimum the surface roughness when grinding SKD11 steel on cylindrical grinder
द्वारा: Trần, Quốc Hùng, और अन्य
प्रकाशित: (2024)

Design of magnetron co-sputtering configuration for preparing magnesium tin silicide-based thermoelectric alloy thin films
प्रकाशित: (2023)

STUDY ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE AT THE INTERFACE BETWEEN 67Ni18Cr5Si4B HVOF THERMAL SPRAY COATING AND C45 STEEL SUBSTRATE
द्वारा: Phạm, Văn Liệu
प्रकाशित: (2023)

Enhancement of sputtering yields due to C60 versus ga bombardment of ag&111; as explored by molecular dynamics simulations /

Influence of indium and hydrogen co-doping on optical and electrical properties of zinc oxide thin films deposited by DC magnetron sputtering
प्रकाशित: (2023)

Influence of technological parameters on the abrasion strength of 40CrMo steel plasma nitride
द्वारा: Hoàng, Minh Thuận, और अन्य
प्रकाशित: (2024)

Photocatalytic activity, antibacterial effect, photoinduced hydrophilicity of TiO2 films coated on a stainless steel substrate /

A new study for polishing the surface of Ni-P coated 20CrNi2Mo steel
द्वारा: Phùng, Xuân Sơn, और अन्य
प्रकाशित: (2024)

Chameleon coatings : Adaptive surfaces to reduce friction and wear in extreme environments /
द्वारा: Muratore, C.

Influence of cutting parameters on surface roughness of workpiece when surface grinding SKD11 steel using Hai Duong grinding wheel
द्वारा: Nguyễn, Văn Thiện, और अन्य
प्रकाशित: (2024)

Application of Taguchi - PSI combined to multi-response optimization of process parameters in die- sinking electrical discharge machining for SKD11 steel
द्वारा: Nguyễn, Văn Đức, और अन्य
प्रकाशित: (2024)

INVESTIGATION OF BACK-PROPAGATION NETWORK STRUCTURES IN PREDICTING WEAR VALUE OF CBN-COATED TOOLS DURING HIGH-SPEED DRY TURNING OF SKD11 STEEL
द्वारा: Hoang, Thi Dieu, और अन्य
प्रकाशित: (2025)

Application of Taguchi - PSI combined to multi-response optimization of process parameters in die- sinking electrical disc-harge machining for SKD11 steel
द्वारा: Nguyễn, Văn Đức, और अन्य
प्रकाशित: (2024)

Resonance and nonresonant laser ionization of sputtered uranium atoms from thin films and single microparticles : Evaluation of a combined system for particle trace analysis /

Tổng hợp màng cứng CrN bằng phương pháp phún xạ mạ ion (SIP)
द्वारा: Đinh, Thị Mộng Cầm
प्रकाशित: (2011)

INVESTIGATED FOR THEIR EFFECT TO FRICTION AND WEAR PROPERTIES OF THE S45C STEEL AT UN-LUBRICATED CONDITION
द्वारा: Phạm, Đình Nhã, और अन्य
प्रकाशित: (2024)

STUDY ON THE INFLUENCE OF CUTTING PARAMETERS ON CONSUMPTION ENERGY AND SURFACE ROUGHNESS IN HIGH-SPEED FACE MILLING OF SKD11 STEEL AFTER HEAT TREATMENT USING ARTIFICIAL ECO-SYSTEM ALGORITHM
द्वारा: Dao, Van Duong, और अन्य
प्रकाशित: (2025)

Controllable preparation of patterns of aligned carbon nanotubes on metals and metal-coated silicon substrates /

A STUDY ON SURFACE ROUGHNESS IN EDM MACHINING WITH COPPER ELECTRODE IN STAINLESS STEEL SKD11
द्वारा: Trần, Quang Huy, और अन्य
प्रकाशित: (2024)

Effect of parameters on the electrodeposition of Ni-TiO2 nanocomposite coatings /
द्वारा: Le Thi Phuong Thao.

REPARATION AND CHARACTERIZATION OF ZINC HIDROXYAPATITE COATINGS ON 316L STAINLESS STEEL
द्वारा: Vo, Thi Hanh, और अन्य
प्रकाशित: (2023)

Multi-objective optimization of SKD61 steel WEDM to improve cutting velocity and reduce surface roughness
द्वारा: Dương, Quốc Dũng, और अन्य
प्रकाशित: (2024)

Evaluating the effectiveness of Topsis-Taguchi integration for the multi-c-haracteristics optimization of technological parameters in PMEDM process
द्वारा: Nguyễn, Hữu Phấn, और अन्य
प्रकाशित: (2024)

Optimizing HVOF spray process parameters to improve adhesion of WC-12Co coatings
द्वारा: Nguyễn, Thanh Phú, और अन्य
प्रकाशित: (2024)

Solid-State Welding: Friction and Friction Stir Welding Processes
द्वारा: Akinlabi, Esther Titilayo, और अन्य
प्रकाशित: (2020)

Fact and friction
द्वारा: Kenichi, Ohmae
प्रकाशित: (1990)

Hard Power in Hard Times
द्वारा: Matlary, Janne Haaland
प्रकाशित: (2020)

The hard thing about hard things :
द्वारा: Horowitz, Ben
प्रकाशित: (2014)

The hard thing about hard things :
द्वारा: Horowitz, Ben
प्रकाशित: (2011)