Study on the influence of technological parameters on the friction c-haracteristics of CrN hard coating was made by sputtering sputtering method on the SKD11 steel substrate

QR code

Study on the influence of technological parameters on the friction c-haracteristics of CrN hard coating was made by sputtering sputtering method on the SKD11 steel substrate

Bewaard in:

Bibliografische gegevens
Hoofdauteurs:	Trần, Văn Đua, Phạm, Đức Cường
Formaat:	Artikel
Taal:	Vietnamese
Gepubliceerd in:	2024
Onderwerpen:	Tạp chí Khoa học & Công nghệ - Đại học Công nghiệp Hà Nội
Online toegang:	https://scholar.dlu.edu.vn/thuvienso/handle/DLU123456789/250413
Tags:	Voeg label toe Geen labels, Wees de eerste die dit record labelt!

Thư viện lưu trữ:	Thư viện Trường Đại học Đà Lạt

Gelijkaardige items

Study on the influence of technological parameters on the friction characteristics of CrN hard coating was made by sputtering sputtering method on the SKD11 steel substrate
door: Trần, Văn Đua, et al.
Gepubliceerd in: (2024)

STUDY THE INFLUENCE OF TECHNOLOGICAL PARAMETERS ON THE ADHESION OF THE CrN HARD COATING TO THE SKD11 STEEL SUBSTRATE WAS MADE BY DC PULSE MAGNETRON SPUTTERING METHOD
door: Tran, Van Dua, et al.
Gepubliceerd in: (2025)

The basics of sputtering third edition
Gepubliceerd in: (1958)

Vacuum technology, thin films, and sputtering
door: Stuart, R. V.
Gepubliceerd in: (1983)

Effects of working pressure on structure and composition of TiAlN coating fabricated by co-sputtering deposition technique
door: Bùi, Tiến Sơn, et al.
Gepubliceerd in: (2024)

COMPARISON CHARACTERIZATIONS OF Cr (III) AND Cr (VI) CONVERSION COATING ON ZINC ELECTROPLATING SUBSTRATE
door: Hoang, Thi Huong Thuy
Gepubliceerd in: (2025)

Preparation of transparent conducting Zn0: Al films on glass substrates by r.f magnetron sputtering : Chế tạo màng bán dẫn trong suốt Zn0: Al trên đế thủy tinh bằng phương pháp phún xạ magnetron /
door: Nguyen Duy Phuong.

Preparation of transparent conducting Zn0 :Al films on glass substrates by r.f magnetron sputtering = Chế tạo màng bán dẫn trong suốt Zn0 :Al trên đế thủy tinh bằng phương pháp phún xạ magnetron /
door: Nguyen Duy Phuong.

Tổng hợp màng tin bằng phương pháp Sputter- Ion- Plating (SIP)
door: Trần, Thế Hưởng
Gepubliceerd in: (2011)

ảnh hưởng của cấu trúc lớp AIBN lên cơ tính của vật liệu đa lớp CrN/AIBN/CrN
door: Nguyễn, Thị Trang, et al.
Gepubliceerd in: (2024)

Electrical characterizations of diodes fabricated on GaN and InGaN films by RF magnetron sputtering
door: Thi, Tran Anh Tuan
Gepubliceerd in: (2015)

Optimization of cutting parameters for minimum the surface roughness when grinding SKD11 steel on cylindrical grinder
door: Trần, Quốc Hùng, et al.
Gepubliceerd in: (2024)

Design of magnetron co-sputtering configuration for preparing magnesium tin silicide-based thermoelectric alloy thin films
Gepubliceerd in: (2023)

STUDY ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE AT THE INTERFACE BETWEEN 67Ni18Cr5Si4B HVOF THERMAL SPRAY COATING AND C45 STEEL SUBSTRATE
door: Phạm, Văn Liệu
Gepubliceerd in: (2023)

Enhancement of sputtering yields due to C60 versus ga bombardment of ag&111; as explored by molecular dynamics simulations /

Influence of indium and hydrogen co-doping on optical and electrical properties of zinc oxide thin films deposited by DC magnetron sputtering
Gepubliceerd in: (2023)

Influence of technological parameters on the abrasion strength of 40CrMo steel plasma nitride
door: Hoàng, Minh Thuận, et al.
Gepubliceerd in: (2024)

Photocatalytic activity, antibacterial effect, photoinduced hydrophilicity of TiO2 films coated on a stainless steel substrate /

A new study for polishing the surface of Ni-P coated 20CrNi2Mo steel
door: Phùng, Xuân Sơn, et al.
Gepubliceerd in: (2024)

Chameleon coatings : Adaptive surfaces to reduce friction and wear in extreme environments /
door: Muratore, C.

Influence of cutting parameters on surface roughness of workpiece when surface grinding SKD11 steel using Hai Duong grinding wheel
door: Nguyễn, Văn Thiện, et al.
Gepubliceerd in: (2024)

Application of Taguchi - PSI combined to multi-response optimization of process parameters in die- sinking electrical discharge machining for SKD11 steel
door: Nguyễn, Văn Đức, et al.
Gepubliceerd in: (2024)

INVESTIGATION OF BACK-PROPAGATION NETWORK STRUCTURES IN PREDICTING WEAR VALUE OF CBN-COATED TOOLS DURING HIGH-SPEED DRY TURNING OF SKD11 STEEL
door: Hoang, Thi Dieu, et al.
Gepubliceerd in: (2025)

Application of Taguchi - PSI combined to multi-response optimization of process parameters in die- sinking electrical disc-harge machining for SKD11 steel
door: Nguyễn, Văn Đức, et al.
Gepubliceerd in: (2024)

Resonance and nonresonant laser ionization of sputtered uranium atoms from thin films and single microparticles : Evaluation of a combined system for particle trace analysis /

Tổng hợp màng cứng CrN bằng phương pháp phún xạ mạ ion (SIP)
door: Đinh, Thị Mộng Cầm
Gepubliceerd in: (2011)

INVESTIGATED FOR THEIR EFFECT TO FRICTION AND WEAR PROPERTIES OF THE S45C STEEL AT UN-LUBRICATED CONDITION
door: Phạm, Đình Nhã, et al.
Gepubliceerd in: (2024)

STUDY ON THE INFLUENCE OF CUTTING PARAMETERS ON CONSUMPTION ENERGY AND SURFACE ROUGHNESS IN HIGH-SPEED FACE MILLING OF SKD11 STEEL AFTER HEAT TREATMENT USING ARTIFICIAL ECO-SYSTEM ALGORITHM
door: Dao, Van Duong, et al.
Gepubliceerd in: (2025)

Controllable preparation of patterns of aligned carbon nanotubes on metals and metal-coated silicon substrates /

A STUDY ON SURFACE ROUGHNESS IN EDM MACHINING WITH COPPER ELECTRODE IN STAINLESS STEEL SKD11
door: Trần, Quang Huy, et al.
Gepubliceerd in: (2024)

Effect of parameters on the electrodeposition of Ni-TiO2 nanocomposite coatings /
door: Le Thi Phuong Thao.

REPARATION AND CHARACTERIZATION OF ZINC HIDROXYAPATITE COATINGS ON 316L STAINLESS STEEL
door: Vo, Thi Hanh, et al.
Gepubliceerd in: (2023)

Multi-objective optimization of SKD61 steel WEDM to improve cutting velocity and reduce surface roughness
door: Dương, Quốc Dũng, et al.
Gepubliceerd in: (2024)

Evaluating the effectiveness of Topsis-Taguchi integration for the multi-c-haracteristics optimization of technological parameters in PMEDM process
door: Nguyễn, Hữu Phấn, et al.
Gepubliceerd in: (2024)

Optimizing HVOF spray process parameters to improve adhesion of WC-12Co coatings
door: Nguyễn, Thanh Phú, et al.
Gepubliceerd in: (2024)

Solid-State Welding: Friction and Friction Stir Welding Processes
door: Akinlabi, Esther Titilayo, et al.
Gepubliceerd in: (2020)

Fact and friction
door: Kenichi, Ohmae
Gepubliceerd in: (1990)

Hard Power in Hard Times
door: Matlary, Janne Haaland
Gepubliceerd in: (2020)

The hard thing about hard things :
door: Horowitz, Ben
Gepubliceerd in: (2014)

The hard thing about hard things :
door: Horowitz, Ben
Gepubliceerd in: (2011)